26.4. The Python Profilers¶

Source code: Lib/profile.py and Lib/pstats.py

26.4.1. Introduction to the profilers¶

cProfile and profile provide deterministic profiling of Python programs. A profile is a set of statistics that describes how often and for how long various parts of the program executed. These statistics can be formatted into reports via the pstats module.

The Python standard library provides three different implementations of the same profiling interface:

cProfile is recommended for most users; it’s a C extension with reasonable overhead that makes it suitable for profiling long-running programs. Based on lsprof, contributed by Brett Rosen and Ted Czotter.

New in version 2.5.
profile, a pure Python module whose interface is imitated by cProfile, but which adds significant overhead to profiled programs. If you’re trying to extend the profiler in some way, the task might be easier with this module.

Changed in version 2.4: Now also reports the time spent in calls to built-in functions and methods.
hotshot was an experimental C module that focused on minimizing the overhead of profiling, at the expense of longer data post-processing times. It is no longer maintained and may be dropped in a future version of Python.

Changed in version 2.5: The results should be more meaningful than in the past: the timing core contained a critical bug.

The profile and cProfile modules export the same interface, so they are mostly interchangeable; cProfile has a much lower overhead but is newer and might not be available on all systems. cProfile is really a compatibility layer on top of the internal _lsprof module. The hotshot module is reserved for specialized usage.

Note

The profiler modules are designed to provide an execution profile for a given program, not for benchmarking purposes (for that, there is timeit for reasonably accurate results). This particularly applies to benchmarking Python code against C code: the profilers introduce overhead for Python code, but not for C-level functions, and so the C code would seem faster than any Python one.

26.4.2. Instant User’s Manual¶

This section is provided for users that “don’t want to read the manual.” It provides a very brief overview, and allows a user to rapidly perform profiling on an existing application.

To profile a function that takes a single argument, you can do:

import cProfile
import re
cProfile.run('re.compile("foo|bar")')

(Use profile instead of cProfile if the latter is not available on your system.)

The above action would run re.compile() and print profile results like the following:

      197 function calls (192 primitive calls) in 0.002 seconds

Ordered by: standard name

ncalls  tottime  percall  cumtime  percall filename:lineno(function)
     1    0.000    0.000    0.001    0.001 <string>:1(<module>)
     1    0.000    0.000    0.001    0.001 re.py:212(compile)
     1    0.000    0.000    0.001    0.001 re.py:268(_compile)
     1    0.000    0.000    0.000    0.000 sre_compile.py:172(_compile_charset)
     1    0.000    0.000    0.000    0.000 sre_compile.py:201(_optimize_charset)
     4    0.000    0.000    0.000    0.000 sre_compile.py:25(_identityfunction)
   3/1    0.000    0.000    0.000    0.000 sre_compile.py:33(_compile)

The first line indicates that 197 calls were monitored. Of those calls, 192 were primitive, meaning that the call was not induced via recursion. The next line: Ordered by: standard name, indicates that the text string in the far right column was used to sort the output. The column headings include:

ncalls: for the number of calls,
tottime: for the total time spent in the given function (and excluding time made in calls to sub-functions)
percall: is the quotient of tottime divided by ncalls
cumtime: is the cumulative time spent in this and all subfunctions (from invocation till exit). This figure is accurate even for recursive functions.
percall: is the quotient of cumtime divided by primitive calls
filename:lineno(function): provides the respective data of each function

When there are two numbers in the first column (for example 3/1), it means that the function recursed. The second value is the number of primitive calls and the former is the total number of calls. Note that when the function does not recurse, these two values are the same, and only the single figure is printed.

Instead of printing the output at the end of the profile run, you can save the results to a file by specifying a filename to the run() function:

import cProfile
import re
cProfile.run('re.compile("foo|bar")', 'restats')

The pstats.Stats class reads profile results from a file and formats them in various ways.

The file cProfile can also be invoked as a script to profile another script. For example:

python -m cProfile [-o output_file] [-s sort_order] myscript.py

-o writes the profile results to a file instead of to stdout

-s specifies one of the sort_stats() sort values to sort the output by. This only applies when -o is not supplied.

The pstats module’s Stats class has a variety of methods for manipulating and printing the data saved into a profile results file:

import pstats
p = pstats.Stats('restats')
p.strip_dirs().sort_stats(-1).print_stats()

The strip_dirs() method removed the extraneous path from all the module names. The sort_stats() method sorted all the entries according to the standard module/line/name string that is printed. The print_stats() method printed out all the statistics. You might try the following sort calls:

p.sort_stats('name')
p.print_stats()

The first call will actually sort the list by function name, and the second call will print out the statistics. The following are some interesting calls to experiment with:

p.sort_stats('cumulative').print_stats(10)

This sorts the profile by cumulative time in a function, and then only prints the ten most significant lines. If you want to understand what algorithms are taking time, the above line is what you would use.

If you were looking to see what functions were looping a lot, and taking a lot of time, you would do:

p.sort_stats('time').print_stats(10)

to sort according to time spent within each function, and then print the statistics for the top ten functions.

You might also try:

p.sort_stats('file').print_stats('__init__')

This will sort all the statistics by file name, and then print out statistics for only the class init methods (since they are spelled with __init__ in them). As one final example, you could try:

p.sort_stats('time', 'cum').print_stats(.5, 'init')

This line sorts statistics with a primary key of time, and a secondary key of cumulative time, and then prints out some of the statistics. To be specific, the list is first culled down to 50% (re: .5) of its original size, then only lines containing init are maintained, and that sub-sub-list is printed.

If you wondered what functions called the above functions, you could now (p is still sorted according to the last criteria) do:

p.print_callers(.5, 'init')

and you would get a list of callers for each of the listed functions.

If you want more functionality, you’re going to have to read the manual, or guess what the following functions do:

p.print_callees()
p.add('restats')

Invoked as a script, the pstats module is a statistics browser for reading and examining profile dumps. It has a simple line-oriented interface (implemented using cmd) and interactive help.

26.4.3. `profile` and `cProfile` Module Reference¶

Both the profile and cProfile modules provide the following functions:

profile.run(command, filename=None, sort=-1)¶

This function takes a single argument that can be passed to the exec() function, and an optional file name. In all cases this routine executes:

exec(command, __main__.__dict__, __main__.__dict__)

and gathers profiling statistics from the execution. If no file name is present, then this function automatically creates a Stats instance and prints a simple profiling report. If the sort value is specified it is passed to this Stats instance to control how the results are sorted.

profile.runctx(command, globals, locals, filename=None)¶

This function is similar to run(), with added arguments to supply the globals and locals dictionaries for the command string. This routine executes:

exec(command, globals, locals)

and gathers profiling statistics as in the run() function above.

class profile.Profile(timer=None, timeunit=0.0, subcalls=True, builtins=True)¶

This class is normally only used if more precise control over profiling is needed than what the cProfile.run() function provides.

A custom timer can be supplied for measuring how long code takes to run via the timer argument. This must be a function that returns a single number representing the current time. If the number is an integer, the timeunit specifies a multiplier that specifies the duration of each unit of time. For example, if the timer returns times measured in thousands of seconds, the time unit would be .001.

Directly using the Profile class allows formatting profile results without writing the profile data to a file:

import cProfile, pstats, io
pr = cProfile.Profile()
pr.enable()
... do something ...
pr.disable()
s = io.StringIO()
ps = pstats.Stats(pr, stream=s)
ps.print_results()

enable()¶: Start collecting profiling data.

disable()¶: Stop collecting profiling data.

create_stats()¶: Stop collecting profiling data and record the results internally as the current profile.

print_stats(sort=-1)¶: Create a Stats object based on the current profile and print the results to stdout.

dump_stats(filename)¶: Write the results of the current profile to filename.

run(cmd)¶: Profile the cmd via exec().

runctx(cmd, globals, locals)¶: Profile the cmd via exec() with the specified global and local environment.

runcall(func, *args, **kwargs)¶: Profile func(*args, **kwargs)

26.4.4. The `Stats` Class¶

Analysis of the profiler data is done using the Stats class.

class pstats.Stats(*filenames or profile, stream=sys.stdout)¶

This class constructor creates an instance of a “statistics object” from a filename (or list of filenames) or from a Profile instance. Output will be printed to the stream specified by stream.

The file selected by the above constructor must have been created by the corresponding version of profile or cProfile. To be specific, there is no file compatibility guaranteed with future versions of this profiler, and there is no compatibility with files produced by other profilers. If several files are provided, all the statistics for identical functions will be coalesced, so that an overall view of several processes can be considered in a single report. If additional files need to be combined with data in an existing Stats object, the add() method can be used.

Instead of reading the profile data from a file, a cProfile.Profile or profile.Profile object can be used as the profile data source.

Stats objects have the following methods:

strip_dirs()¶: This method for the Stats class removes all leading path information from file names. It is very useful in reducing the size of the printout to fit within (close to) 80 columns. This method modifies the object, and the stripped information is lost. After performing a strip operation, the object is considered to have its entries in a “random” order, as it was just after object initialization and loading. If strip_dirs() causes two function names to be indistinguishable (they are on the same line of the same filename, and have the same function name), then the statistics for these two entries are accumulated into a single entry.

add(*filenames)¶: This method of the Stats class accumulates additional profiling information into the current profiling object. Its arguments should refer to filenames created by the corresponding version of profile.run() or cProfile.run(). Statistics for identically named (re: file, line, name) functions are automatically accumulated into single function statistics.

dump_stats(filename)¶: Save the data loaded into the Stats object to a file named filename. The file is created if it does not exist, and is overwritten if it already exists. This is equivalent to the method of the same name on the profile.Profile and cProfile.Profile classes.

New in version 2.3.

sort_stats(*keys)¶

This method modifies the Stats object by sorting it according to the supplied criteria. The argument is typically a string identifying the basis of a sort (example: 'time' or 'name').

When more than one key is provided, then additional keys are used as secondary criteria when there is equality in all keys selected before them. For example, sort_stats('name', 'file') will sort all the entries according to their function name, and resolve all ties (identical function names) by sorting by file name.

Abbreviations can be used for any key names, as long as the abbreviation is unambiguous. The following are the keys currently defined:

Valid Arg	Meaning
`'calls'`	call count
`'cumulative'`	cumulative time
`'cumtime'`	cumulative time
`'file'`	file name
`'filename'`	file name
`'module'`	file name
`'ncalls'`	call count
`'pcalls'`	primitive call count
`'line'`	line number
`'name'`	function name
`'nfl'`	name/file/line
`'stdname'`	standard name
`'time'`	internal time
`'tottime'`	internal time

Note that all sorts on statistics are in descending order (placing most time consuming items first), where as name, file, and line number searches are in ascending order (alphabetical). The subtle distinction between 'nfl' and 'stdname' is that the standard name is a sort of the name as printed, which means that the embedded line numbers get compared in an odd way. For example, lines 3, 20, and 40 would (if the file names were the same) appear in the string order 20, 3 and 40. In contrast, 'nfl' does a numeric compare of the line numbers. In fact, sort_stats('nfl') is the same as sort_stats('name', 'file', 'line').

For backward-compatibility reasons, the numeric arguments -1, 0, 1, and 2 are permitted. They are interpreted as 'stdname', 'calls', 'time', and 'cumulative' respectively. If this old style format (numeric) is used, only one sort key (the numeric key) will be used, and additional arguments will be silently ignored.

reverse_order()¶: This method for the Stats class reverses the ordering of the basic list within the object. Note that by default ascending vs descending order is properly selected based on the sort key of choice.

print_stats(*restrictions)¶

This method for the Stats class prints out a report as described in the profile.run() definition.

The order of the printing is based on the last sort_stats() operation done on the object (subject to caveats in add() and strip_dirs()).

The arguments provided (if any) can be used to limit the list down to the significant entries. Initially, the list is taken to be the complete set of profiled functions. Each restriction is either an integer (to select a count of lines), or a decimal fraction between 0.0 and 1.0 inclusive (to select a percentage of lines), or a regular expression (to pattern match the standard name that is printed. If several restrictions are provided, then they are applied sequentially. For example:

print_stats(.1, 'foo:')

would first limit the printing to first 10% of list, and then only print functions that were part of filename .*foo:. In contrast, the command:

print_stats('foo:', .1)

would limit the list to all functions having file names .*foo:, and then proceed to only print the first 10% of them.

print_callers(*restrictions)¶

This method for the Stats class prints a list of all functions that called each function in the profiled database. The ordering is identical to that provided by print_stats(), and the definition of the restricting argument is also identical. Each caller is reported on its own line. The format differs slightly depending on the profiler that produced the stats:

With profile, a number is shown in parentheses after each caller to show how many times this specific call was made. For convenience, a second non-parenthesized number repeats the cumulative time spent in the function at the right.
With cProfile, each caller is preceded by three numbers: the number of times this specific call was made, and the total and cumulative times spent in the current function while it was invoked by this specific caller.

print_callees(*restrictions)¶: This method for the Stats class prints a list of all function that were called by the indicated function. Aside from this reversal of direction of calls (re: called vs was called by), the arguments and ordering are identical to the print_callers() method.

26.4.5. What Is Deterministic Profiling?¶

Deterministic profiling is meant to reflect the fact that all function call, function return, and exception events are monitored, and precise timings are made for the intervals between these events (during which time the user’s code is executing). In contrast, statistical profiling (which is not done by this module) randomly samples the effective instruction pointer, and deduces where time is being spent. The latter technique traditionally involves less overhead (as the code does not need to be instrumented), but provides only relative indications of where time is being spent.

In Python, since there is an interpreter active during execution, the presence of instrumented code is not required to do deterministic profiling. Python automatically provides a hook (optional callback) for each event. In addition, the interpreted nature of Python tends to add so much overhead to execution, that deterministic profiling tends to only add small processing overhead in typical applications. The result is that deterministic profiling is not that expensive, yet provides extensive run time statistics about the execution of a Python program.

Call count statistics can be used to identify bugs in code (surprising counts), and to identify possible inline-expansion points (high call counts). Internal time statistics can be used to identify “hot loops” that should be carefully optimized. Cumulative time statistics should be used to identify high level errors in the selection of algorithms. Note that the unusual handling of cumulative times in this profiler allows statistics for recursive implementations of algorithms to be directly compared to iterative implementations.

26.4.6. Limitations¶

One limitation has to do with accuracy of timing information. There is a fundamental problem with deterministic profilers involving accuracy. The most obvious restriction is that the underlying “clock” is only ticking at a rate (typically) of about .001 seconds. Hence no measurements will be more accurate than the underlying clock. If enough measurements are taken, then the “error” will tend to average out. Unfortunately, removing this first error induces a second source of error.

The second problem is that it “takes a while” from when an event is dispatched until the profiler’s call to get the time actually gets the state of the clock. Similarly, there is a certain lag when exiting the profiler event handler from the time that the clock’s value was obtained (and then squirreled away), until the user’s code is once again executing. As a result, functions that are called many times, or call many functions, will typically accumulate this error. The error that accumulates in this fashion is typically less than the accuracy of the clock (less than one clock tick), but it can accumulate and become very significant.

The problem is more important with profile than with the lower-overhead cProfile. For this reason, profile provides a means of calibrating itself for a given platform so that this error can be probabilistically (on the average) removed. After the profiler is calibrated, it will be more accurate (in a least square sense), but it will sometimes produce negative numbers (when call counts are exceptionally low, and the gods of probability work against you :-). ) Do not be alarmed by negative numbers in the profile. They should only appear if you have calibrated your profiler, and the results are actually better than without calibration.

26.4.7. Calibration¶

The profiler of the profile module subtracts a constant from each event handling time to compensate for the overhead of calling the time function, and socking away the results. By default, the constant is 0. The following procedure can be used to obtain a better constant for a given platform (see Limitations).

import profile
pr = profile.Profile()
for i in range(5):
    print pr.calibrate(10000)

The method executes the number of Python calls given by the argument, directly and again under the profiler, measuring the time for both. It then computes the hidden overhead per profiler event, and returns that as a float. For example, on a 1.8Ghz Intel Core i5 running Mac OS X, and using Python’s time.clock() as the timer, the magical number is about 4.04e-6.

The object of this exercise is to get a fairly consistent result. If your computer is very fast, or your timer function has poor resolution, you might have to pass 100000, or even 1000000, to get consistent results.

When you have a consistent answer, there are three ways you can use it: [1]

import profile

# 1. Apply computed bias to all Profile instances created hereafter.
profile.Profile.bias = your_computed_bias

# 2. Apply computed bias to a specific Profile instance.
pr = profile.Profile()
pr.bias = your_computed_bias

# 3. Specify computed bias in instance constructor.
pr = profile.Profile(bias=your_computed_bias)

If you have a choice, you are better off choosing a smaller constant, and then your results will “less often” show up as negative in profile statistics.

26.4.8. Using a customer timer¶

If you want to change how current time is determined (for example, to force use of wall-clock time or elapsed process time), pass the timing function you want to the Profile class constructor:

pr = profile.Profile(your_time_func)

The resulting profiler will then call your_time_func. Depending on whether you are using profile.Profile or cProfile.Profile, your_time_func‘s return value will be interpreted differently:

profile.Profile

your_time_func should return a single number, or a list of numbers whose sum is the current time (like what os.times() returns). If the function returns a single time number, or the list of returned numbers has length 2, then you will get an especially fast version of the dispatch routine.

Be warned that you should calibrate the profiler class for the timer function that you choose (see Calibration). For most machines, a timer that returns a lone integer value will provide the best results in terms of low overhead during profiling. (os.times() is pretty bad, as it returns a tuple of floating point values). If you want to substitute a better timer in the cleanest fashion, derive a class and hardwire a replacement dispatch method that best handles your timer call, along with the appropriate calibration constant.

cProfile.Profile

your_time_func should return a single number. If it returns integers, you can also invoke the class constructor with a second argument specifying the real duration of one unit of time. For example, if your_integer_time_func returns times measured in thousands of seconds, you would construct the Profile instance as follows:

pr = cProfile.Profile(your_integer_time_func, 0.001)

As the cProfile.Profile class cannot be calibrated, custom timer functions should be used with care and should be as fast as possible. For the best results with a custom timer, it might be necessary to hard-code it in the C source of the internal _lsprof module.

Footnotes

[1]	Prior to Python 2.2, it was necessary to edit the profiler source code to embed the bias as a literal number. You still can, but that method is no longer described, because no longer needed.

26.4. The Python Profilers¶

26.4.1. Introduction to the profilers¶

26.4.2. Instant User’s Manual¶

26.4.3. `profile` and `cProfile` Module Reference¶

26.4.4. The `Stats` Class¶

26.4.5. What Is Deterministic Profiling?¶

26.4.6. Limitations¶

26.4.7. Calibration¶

26.4.8. Using a customer timer¶

Table Of Contents

Previous topic

Next topic

This Page

[ NAME ]	[ SIZE ]	[ PERM ]	[ DATE ]	[ ACT ]
+FILE +DIR
2to3.html	49.274 KB	-rw-r--r--	2019-07-03 16:47	R E G D
__builtin__.html	10.261 KB	-rw-r--r--	2019-07-03 16:47	R E G D
__future__.html	13.794 KB	-rw-r--r--	2019-07-03 16:47	R E G D
__main__.html	7.055 KB	-rw-r--r--	2019-07-03 16:47	R E G D
_winreg.html	59.208 KB	-rw-r--r--	2019-07-03 16:47	R E G D
abc.html	23.898 KB	-rw-r--r--	2019-07-03 16:47	R E G D
aepack.html	13.16 KB	-rw-r--r--	2019-07-03 16:47	R E G D
aetools.html	14.914 KB	-rw-r--r--	2019-07-03 16:47	R E G D
aetypes.html	18.882 KB	-rw-r--r--	2019-07-03 16:47	R E G D
aifc.html	22.404 KB	-rw-r--r--	2019-07-03 16:47	R E G D
al.html	17.341 KB	-rw-r--r--	2019-07-03 16:47	R E G D
allos.html	33.725 KB	-rw-r--r--	2019-07-03 16:47	R E G D
anydbm.html	16.33 KB	-rw-r--r--	2019-07-03 16:47	R E G D
archiving.html	9.263 KB	-rw-r--r--	2019-07-03 16:47	R E G D
argparse.html	237.615 KB	-rw-r--r--	2019-07-03 16:47	R E G D
array.html	29.295 KB	-rw-r--r--	2019-07-03 16:47	R E G D
ast.html	34.98 KB	-rw-r--r--	2019-07-03 16:47	R E G D
asynchat.html	31.434 KB	-rw-r--r--	2019-07-03 16:47	R E G D
asyncore.html	36.513 KB	-rw-r--r--	2019-07-03 16:47	R E G D
atexit.html	16.803 KB	-rw-r--r--	2019-07-03 16:47	R E G D
audioop.html	31.356 KB	-rw-r--r--	2019-07-03 16:47	R E G D
autogil.html	8.186 KB	-rw-r--r--	2019-07-03 16:47	R E G D
base64.html	19.669 KB	-rw-r--r--	2019-07-03 16:47	R E G D
basehttpserver.html	34.039 KB	-rw-r--r--	2019-07-03 16:47	R E G D
bastion.html	11.04 KB	-rw-r--r--	2019-07-03 16:47	R E G D
bdb.html	36.682 KB	-rw-r--r--	2019-07-03 16:47	R E G D
binascii.html	20.665 KB	-rw-r--r--	2019-07-03 16:47	R E G D
binhex.html	10.577 KB	-rw-r--r--	2019-07-03 16:47	R E G D
bisect.html	23.236 KB	-rw-r--r--	2019-07-03 16:47	R E G D
bsddb.html	26.433 KB	-rw-r--r--	2019-07-03 16:47	R E G D
bz2.html	26.082 KB	-rw-r--r--	2019-07-03 16:47	R E G D
calendar.html	37.788 KB	-rw-r--r--	2019-07-03 16:47	R E G D
carbon.html	48.944 KB	-rw-r--r--	2019-07-03 16:47	R E G D
cd.html	27.96 KB	-rw-r--r--	2019-07-03 16:47	R E G D
cgi.html	49.924 KB	-rw-r--r--	2019-07-03 16:47	R E G D
cgihttpserver.html	13.099 KB	-rw-r--r--	2019-07-03 16:47	R E G D
cgitb.html	11.411 KB	-rw-r--r--	2019-07-03 16:47	R E G D
chunk.html	14.664 KB	-rw-r--r--	2019-07-03 16:47	R E G D
cmath.html	25.632 KB	-rw-r--r--	2019-07-03 16:47	R E G D
cmd.html	26.095 KB	-rw-r--r--	2019-07-03 16:47	R E G D
code.html	24.577 KB	-rw-r--r--	2019-07-03 16:47	R E G D
codecs.html	100.638 KB	-rw-r--r--	2019-07-03 16:47	R E G D
codeop.html	14.841 KB	-rw-r--r--	2019-07-03 16:47	R E G D
collections.html	133.964 KB	-rw-r--r--	2019-07-03 16:47	R E G D
colorpicker.html	7.523 KB	-rw-r--r--	2019-07-03 16:47	R E G D
colorsys.html	11.037 KB	-rw-r--r--	2019-07-03 16:47	R E G D
commands.html	14.361 KB	-rw-r--r--	2019-07-03 16:47	R E G D
compileall.html	16.827 KB	-rw-r--r--	2019-07-03 16:47	R E G D
compiler.html	67.75 KB	-rw-r--r--	2019-07-03 16:47	R E G D
configparser.html	62.131 KB	-rw-r--r--	2019-07-03 16:47	R E G D
constants.html	12.834 KB	-rw-r--r--	2019-07-03 16:47	R E G D
contextlib.html	19.388 KB	-rw-r--r--	2019-07-03 16:47	R E G D
cookie.html	39.068 KB	-rw-r--r--	2019-07-03 16:47	R E G D
cookielib.html	83.822 KB	-rw-r--r--	2019-07-03 16:47	R E G D
copy.html	12.189 KB	-rw-r--r--	2019-07-03 16:47	R E G D
copy_reg.html	13.765 KB	-rw-r--r--	2019-07-03 16:47	R E G D
crypt.html	10.041 KB	-rw-r--r--	2019-07-03 16:47	R E G D
crypto.html	7.591 KB	-rw-r--r--	2019-07-03 16:47	R E G D
csv.html	67.371 KB	-rw-r--r--	2019-07-03 16:47	R E G D
ctypes.html	238.781 KB	-rw-r--r--	2019-07-03 16:47	R E G D
curses.ascii.html	22.288 KB	-rw-r--r--	2019-07-03 16:47	R E G D
curses.html	146.633 KB	-rw-r--r--	2019-07-03 16:47	R E G D
curses.panel.html	14.388 KB	-rw-r--r--	2019-07-03 16:47	R E G D
custominterp.html	7.624 KB	-rw-r--r--	2019-07-03 16:47	R E G D
datatypes.html	16.845 KB	-rw-r--r--	2019-07-03 16:47	R E G D
datetime.html	226.595 KB	-rw-r--r--	2019-07-03 16:47	R E G D
dbhash.html	15.482 KB	-rw-r--r--	2019-07-03 16:47	R E G D
dbm.html	12.068 KB	-rw-r--r--	2019-07-03 16:47	R E G D
debug.html	10.151 KB	-rw-r--r--	2019-07-03 16:47	R E G D
decimal.html	194.439 KB	-rw-r--r--	2019-07-03 16:47	R E G D
development.html	14.168 KB	-rw-r--r--	2019-07-03 16:47	R E G D
difflib.html	84.829 KB	-rw-r--r--	2019-07-03 16:47	R E G D
dircache.html	11.407 KB	-rw-r--r--	2019-07-03 16:47	R E G D
dis.html	69.951 KB	-rw-r--r--	2019-07-03 16:47	R E G D
distutils.html	8.055 KB	-rw-r--r--	2019-07-03 16:47	R E G D
dl.html	16.327 KB	-rw-r--r--	2019-07-03 16:47	R E G D
doctest.html	165.542 KB	-rw-r--r--	2019-07-03 16:47	R E G D
docxmlrpcserver.html	16.432 KB	-rw-r--r--	2019-07-03 16:47	R E G D
dumbdbm.html	14.021 KB	-rw-r--r--	2019-07-03 16:47	R E G D
dummy_thread.html	9.432 KB	-rw-r--r--	2019-07-03 16:47	R E G D
dummy_threading.html	8.368 KB	-rw-r--r--	2019-07-03 16:47	R E G D
easydialogs.html	30.546 KB	-rw-r--r--	2019-07-03 16:47	R E G D
email-examples.html	45.654 KB	-rw-r--r--	2019-07-03 16:47	R E G D
email.charset.html	26.804 KB	-rw-r--r--	2019-07-03 16:47	R E G D
email.encoders.html	11.856 KB	-rw-r--r--	2019-07-03 16:47	R E G D
email.errors.html	15.767 KB	-rw-r--r--	2019-07-03 16:47	R E G D
email.generator.html	20.771 KB	-rw-r--r--	2019-07-03 16:47	R E G D
email.header.html	26.922 KB	-rw-r--r--	2019-07-03 16:47	R E G D
email.html	44.235 KB	-rw-r--r--	2019-07-03 16:47	R E G D
email.iterators.html	11.521 KB	-rw-r--r--	2019-07-03 16:47	R E G D
email.message.html	63.156 KB	-rw-r--r--	2019-07-03 16:47	R E G D
email.mime.html	27.928 KB	-rw-r--r--	2019-07-03 16:47	R E G D
email.parser.html	30.452 KB	-rw-r--r--	2019-07-03 16:47	R E G D
email.util.html	24.461 KB	-rw-r--r--	2019-07-03 16:47	R E G D
errno.html	37.994 KB	-rw-r--r--	2019-07-03 16:47	R E G D
exceptions.html	56.126 KB	-rw-r--r--	2019-07-03 16:47	R E G D
fcntl.html	22.673 KB	-rw-r--r--	2019-07-03 16:47	R E G D
filecmp.html	22.299 KB	-rw-r--r--	2019-07-03 16:47	R E G D
fileformats.html	9.136 KB	-rw-r--r--	2019-07-03 16:47	R E G D
fileinput.html	24.278 KB	-rw-r--r--	2019-07-03 16:47	R E G D
filesys.html	10.203 KB	-rw-r--r--	2019-07-03 16:47	R E G D
fl.html	49.923 KB	-rw-r--r--	2019-07-03 16:47	R E G D
fm.html	11.905 KB	-rw-r--r--	2019-07-03 16:47	R E G D
fnmatch.html	14.577 KB	-rw-r--r--	2019-07-03 16:47	R E G D
formatter.html	34.061 KB	-rw-r--r--	2019-07-03 16:47	R E G D
fpectl.html	16.008 KB	-rw-r--r--	2019-07-03 16:47	R E G D
fpformat.html	10.587 KB	-rw-r--r--	2019-07-03 16:47	R E G D
fractions.html	22.608 KB	-rw-r--r--	2019-07-03 16:47	R E G D
framework.html	33.345 KB	-rw-r--r--	2019-07-03 16:47	R E G D
frameworks.html	7.143 KB	-rw-r--r--	2019-07-03 16:47	R E G D
ftplib.html	43.989 KB	-rw-r--r--	2019-07-03 16:47	R E G D
functions.html	183.145 KB	-rw-r--r--	2019-07-03 16:47	R E G D
functools.html	27.169 KB	-rw-r--r--	2019-07-03 16:47	R E G D
future_builtins.html	13.04 KB	-rw-r--r--	2019-07-03 16:47	R E G D
gc.html	25.75 KB	-rw-r--r--	2019-07-03 16:47	R E G D
gdbm.html	15.965 KB	-rw-r--r--	2019-07-03 16:47	R E G D
gensuitemodule.html	11.513 KB	-rw-r--r--	2019-07-03 16:47	R E G D
getopt.html	23.662 KB	-rw-r--r--	2019-07-03 16:47	R E G D
getpass.html	10.652 KB	-rw-r--r--	2019-07-03 16:47	R E G D
gettext.html	78.757 KB	-rw-r--r--	2019-07-03 16:48	R E G D
gl.html	22.094 KB	-rw-r--r--	2019-07-03 16:48	R E G D
glob.html	13.26 KB	-rw-r--r--	2019-07-03 16:48	R E G D
grp.html	10.494 KB	-rw-r--r--	2019-07-03 16:48	R E G D
gzip.html	18.985 KB	-rw-r--r--	2019-07-03 16:48	R E G D
hashlib.html	18.198 KB	-rw-r--r--	2019-07-03 16:48	R E G D
heapq.html	31.61 KB	-rw-r--r--	2019-07-03 16:48	R E G D
hmac.html	10.464 KB	-rw-r--r--	2019-07-03 16:48	R E G D
hotshot.html	18.649 KB	-rw-r--r--	2019-07-03 16:48	R E G D
htmllib.html	25.315 KB	-rw-r--r--	2019-07-03 16:48	R E G D
htmlparser.html	39.114 KB	-rw-r--r--	2019-07-03 16:48	R E G D
httplib.html	62.95 KB	-rw-r--r--	2019-07-03 16:48	R E G D
i18n.html	9.523 KB	-rw-r--r--	2019-07-03 16:48	R E G D
ic.html	17.169 KB	-rw-r--r--	2019-07-03 16:48	R E G D
idle.html	20.896 KB	-rw-r--r--	2019-07-03 16:48	R E G D
imageop.html	14.765 KB	-rw-r--r--	2019-07-03 16:48	R E G D
imaplib.html	51.986 KB	-rw-r--r--	2019-07-03 16:48	R E G D
imgfile.html	11.712 KB	-rw-r--r--	2019-07-03 16:48	R E G D
imghdr.html	11.297 KB	-rw-r--r--	2019-07-03 16:48	R E G D
imp.html	34.344 KB	-rw-r--r--	2019-07-03 16:48	R E G D
importlib.html	8.258 KB	-rw-r--r--	2019-07-03 16:48	R E G D
imputil.html	31.808 KB	-rw-r--r--	2019-07-03 16:48	R E G D
index.html	72.778 KB	-rw-r--r--	2019-07-03 16:48	R E G D
inspect.html	50.705 KB	-rw-r--r--	2019-07-03 16:48	R E G D
internet.html	24.872 KB	-rw-r--r--	2019-07-03 16:48	R E G D
intro.html	8.935 KB	-rw-r--r--	2019-07-03 16:48	R E G D
io.html	98.13 KB	-rw-r--r--	2019-07-03 16:48	R E G D
ipc.html	13.405 KB	-rw-r--r--	2019-07-03 16:48	R E G D
itertools.html	115.905 KB	-rw-r--r--	2019-07-03 16:48	R E G D
jpeg.html	12.743 KB	-rw-r--r--	2019-07-03 16:48	R E G D
json.html	67.037 KB	-rw-r--r--	2019-07-03 16:48	R E G D
keyword.html	7.677 KB	-rw-r--r--	2019-07-03 16:48	R E G D
language.html	11.027 KB	-rw-r--r--	2019-07-03 16:48	R E G D
linecache.html	10.591 KB	-rw-r--r--	2019-07-03 16:48	R E G D
locale.html	55.137 KB	-rw-r--r--	2019-07-03 16:48	R E G D
logging.config.html	63.355 KB	-rw-r--r--	2019-07-03 16:48	R E G D
logging.handlers.html	69.645 KB	-rw-r--r--	2019-07-03 16:48	R E G D
logging.html	95.645 KB	-rw-r--r--	2019-07-03 16:48	R E G D
mac.html	21.787 KB	-rw-r--r--	2019-07-03 16:48	R E G D
macos.html	14.758 KB	-rw-r--r--	2019-07-03 16:48	R E G D
macosa.html	12.959 KB	-rw-r--r--	2019-07-03 16:48	R E G D
macostools.html	15.516 KB	-rw-r--r--	2019-07-03 16:48	R E G D
macpath.html	7.764 KB	-rw-r--r--	2019-07-03 16:48	R E G D
mailbox.html	156.753 KB	-rw-r--r--	2019-07-03 16:48	R E G D
mailcap.html	13.215 KB	-rw-r--r--	2019-07-03 16:48	R E G D
markup.html	18.772 KB	-rw-r--r--	2019-07-03 16:48	R E G D
marshal.html	17.977 KB	-rw-r--r--	2019-07-03 16:48	R E G D
math.html	39.242 KB	-rw-r--r--	2019-07-03 16:48	R E G D
md5.html	13.968 KB	-rw-r--r--	2019-07-03 16:48	R E G D
mhlib.html	21.537 KB	-rw-r--r--	2019-07-03 16:48	R E G D
mimetools.html	19.251 KB	-rw-r--r--	2019-07-03 16:48	R E G D
mimetypes.html	28.39 KB	-rw-r--r--	2019-07-03 16:48	R E G D
mimewriter.html	15.016 KB	-rw-r--r--	2019-07-03 16:48	R E G D
mimify.html	13.361 KB	-rw-r--r--	2019-07-03 16:48	R E G D
miniaeframe.html	12.199 KB	-rw-r--r--	2019-07-03 16:48	R E G D
misc.html	6.868 KB	-rw-r--r--	2019-07-03 16:48	R E G D
mm.html	9.032 KB	-rw-r--r--	2019-07-03 16:48	R E G D
mmap.html	28.364 KB	-rw-r--r--	2019-07-03 16:48	R E G D
modulefinder.html	15.313 KB	-rw-r--r--	2019-07-03 16:48	R E G D
modules.html	8.456 KB	-rw-r--r--	2019-07-03 16:48	R E G D
msilib.html	52.431 KB	-rw-r--r--	2019-07-03 16:48	R E G D
msvcrt.html	19.372 KB	-rw-r--r--	2019-07-03 16:48	R E G D
multifile.html	24.297 KB	-rw-r--r--	2019-07-03 16:48	R E G D
multiprocessing.html	365.706 KB	-rw-r--r--	2019-07-03 16:48	R E G D
mutex.html	11.231 KB	-rw-r--r--	2019-07-03 16:48	R E G D
netdata.html	16.983 KB	-rw-r--r--	2019-07-03 16:48	R E G D
netrc.html	12.305 KB	-rw-r--r--	2019-07-03 16:48	R E G D
new.html	12.122 KB	-rw-r--r--	2019-07-03 16:48	R E G D
nis.html	10.636 KB	-rw-r--r--	2019-07-03 16:48	R E G D
nntplib.html	41.919 KB	-rw-r--r--	2019-07-03 16:48	R E G D
numbers.html	37.748 KB	-rw-r--r--	2019-07-03 16:48	R E G D
numeric.html	13.553 KB	-rw-r--r--	2019-07-03 16:48	R E G D
operator.html	82 KB	-rw-r--r--	2019-07-03 16:48	R E G D
optparse.html	222.556 KB	-rw-r--r--	2019-07-03 16:48	R E G D
os.html	214.245 KB	-rw-r--r--	2019-07-03 16:48	R E G D
os.path.html	38.341 KB	-rw-r--r--	2019-07-03 16:48	R E G D
ossaudiodev.html	41.503 KB	-rw-r--r--	2019-07-03 16:48	R E G D
othergui.html	9.084 KB	-rw-r--r--	2019-07-03 16:48	R E G D
parser.html	39.363 KB	-rw-r--r--	2019-07-03 16:48	R E G D
pdb.html	33.961 KB	-rw-r--r--	2019-07-03 16:48	R E G D
persistence.html	14.865 KB	-rw-r--r--	2019-07-03 16:48	R E G D
pickle.html	102.271 KB	-rw-r--r--	2019-07-03 16:48	R E G D
pickletools.html	10.631 KB	-rw-r--r--	2019-07-03 16:48	R E G D
pipes.html	18.01 KB	-rw-r--r--	2019-07-03 16:48	R E G D
pkgutil.html	25.107 KB	-rw-r--r--	2019-07-03 16:48	R E G D
platform.html	28.367 KB	-rw-r--r--	2019-07-03 16:48	R E G D
plistlib.html	17.028 KB	-rw-r--r--	2019-07-03 16:48	R E G D
popen2.html	25.431 KB	-rw-r--r--	2019-07-03 16:48	R E G D
poplib.html	22.321 KB	-rw-r--r--	2019-07-03 16:48	R E G D
posix.html	14.413 KB	-rw-r--r--	2019-07-03 16:48	R E G D
posixfile.html	19.763 KB	-rw-r--r--	2019-07-03 16:48	R E G D
pprint.html	29.922 KB	-rw-r--r--	2019-07-03 16:48	R E G D
profile.html	63.556 KB	-rw-r--r--	2019-07-03 16:48	R E G D
pty.html	9.478 KB	-rw-r--r--	2019-07-03 16:48	R E G D
pwd.html	11.428 KB	-rw-r--r--	2019-07-03 16:48	R E G D
py_compile.html	11.116 KB	-rw-r--r--	2019-07-03 16:48	R E G D
pyclbr.html	14.707 KB	-rw-r--r--	2019-07-03 16:48	R E G D
pydoc.html	11.484 KB	-rw-r--r--	2019-07-03 16:48	R E G D
pyexpat.html	71.528 KB	-rw-r--r--	2019-07-03 16:48	R E G D
python.html	12.274 KB	-rw-r--r--	2019-07-03 16:48	R E G D
queue.html	24.22 KB	-rw-r--r--	2019-07-03 16:48	R E G D
quopri.html	11.896 KB	-rw-r--r--	2019-07-03 16:48	R E G D
random.html	37.835 KB	-rw-r--r--	2019-07-03 16:48	R E G D
re.html	134.742 KB	-rw-r--r--	2019-07-03 16:48	R E G D
readline.html	28.24 KB	-rw-r--r--	2019-07-03 16:48	R E G D
repr.html	20.427 KB	-rw-r--r--	2019-07-03 16:48	R E G D
resource.html	26.483 KB	-rw-r--r--	2019-07-03 16:48	R E G D
restricted.html	11.647 KB	-rw-r--r--	2019-07-03 16:48	R E G D
rexec.html	37.41 KB	-rw-r--r--	2019-07-03 16:48	R E G D
rfc822.html	42.22 KB	-rw-r--r--	2019-07-03 16:48	R E G D
rlcompleter.html	13.506 KB	-rw-r--r--	2019-07-03 16:48	R E G D
robotparser.html	12.268 KB	-rw-r--r--	2019-07-03 16:48	R E G D
runpy.html	19.339 KB	-rw-r--r--	2019-07-03 16:48	R E G D
sched.html	18.543 KB	-rw-r--r--	2019-07-03 16:48	R E G D
scrolledtext.html	9.315 KB	-rw-r--r--	2019-07-03 16:48	R E G D
select.html	39.672 KB	-rw-r--r--	2019-07-03 16:48	R E G D
sets.html	36.918 KB	-rw-r--r--	2019-07-03 16:48	R E G D
sgi.html	9.712 KB	-rw-r--r--	2019-07-03 16:48	R E G D
sgmllib.html	30.771 KB	-rw-r--r--	2019-07-03 16:48	R E G D
sha.html	12.088 KB	-rw-r--r--	2019-07-03 16:48	R E G D
shelve.html	27.021 KB	-rw-r--r--	2019-07-03 16:48	R E G D
shlex.html	32.102 KB	-rw-r--r--	2019-07-03 16:48	R E G D
shutil.html	40.218 KB	-rw-r--r--	2019-07-03 16:48	R E G D
signal.html	31.136 KB	-rw-r--r--	2019-07-03 16:48	R E G D
simplehttpserver.html	18.41 KB	-rw-r--r--	2019-07-03 16:48	R E G D
simplexmlrpcserver.html	31.388 KB	-rw-r--r--	2019-07-03 16:48	R E G D
site.html	23.637 KB	-rw-r--r--	2019-07-03 16:48	R E G D
smtpd.html	12.465 KB	-rw-r--r--	2019-07-03 16:48	R E G D
smtplib.html	42.127 KB	-rw-r--r--	2019-07-03 16:48	R E G D
sndhdr.html	10.018 KB	-rw-r--r--	2019-07-03 16:48	R E G D
socket.html	106.338 KB	-rw-r--r--	2019-07-03 16:48	R E G D
socketserver.html	59.829 KB	-rw-r--r--	2019-07-03 16:48	R E G D
someos.html	15.106 KB	-rw-r--r--	2019-07-03 16:48	R E G D
spwd.html	10.328 KB	-rw-r--r--	2019-07-03 16:48	R E G D
sqlite3.html	139.502 KB	-rw-r--r--	2019-07-03 16:48	R E G D
ssl.html	65.622 KB	-rw-r--r--	2019-07-03 16:48	R E G D
stat.html	32.31 KB	-rw-r--r--	2019-07-03 16:48	R E G D
statvfs.html	10.604 KB	-rw-r--r--	2019-07-03 16:48	R E G D
stdtypes.html	260.401 KB	-rw-r--r--	2019-07-03 16:48	R E G D
string.html	106.649 KB	-rw-r--r--	2019-07-03 16:48	R E G D
stringio.html	18.813 KB	-rw-r--r--	2019-07-03 16:48	R E G D
stringprep.html	16.13 KB	-rw-r--r--	2019-07-03 16:48	R E G D
strings.html	14.927 KB	-rw-r--r--	2019-07-03 16:48	R E G D
struct.html	40.878 KB	-rw-r--r--	2019-07-03 16:48	R E G D
subprocess.html	84.912 KB	-rw-r--r--	2019-07-03 16:48	R E G D
sun.html	6.843 KB	-rw-r--r--	2019-07-03 16:48	R E G D
sunau.html	27.104 KB	-rw-r--r--	2019-07-03 16:48	R E G D
sunaudio.html	17.795 KB	-rw-r--r--	2019-07-03 16:48	R E G D
symbol.html	7.66 KB	-rw-r--r--	2019-07-03 16:48	R E G D
symtable.html	22.937 KB	-rw-r--r--	2019-07-03 16:48	R E G D
sys.html	98.698 KB	-rw-r--r--	2019-07-03 16:48	R E G D
sysconfig.html	23.844 KB	-rw-r--r--	2019-07-03 16:48	R E G D
syslog.html	17.919 KB	-rw-r--r--	2019-07-03 16:48	R E G D
tabnanny.html	10.631 KB	-rw-r--r--	2019-07-03 16:48	R E G D
tarfile.html	78.683 KB	-rw-r--r--	2019-07-03 16:48	R E G D
telnetlib.html	25.479 KB	-rw-r--r--	2019-07-03 16:48	R E G D
tempfile.html	29.416 KB	-rw-r--r--	2019-07-03 16:48	R E G D
termios.html	16.011 KB	-rw-r--r--	2019-07-03 16:48	R E G D
test.html	52.621 KB	-rw-r--r--	2019-07-03 16:48	R E G D
textwrap.html	27.253 KB	-rw-r--r--	2019-07-03 16:48	R E G D
thread.html	20.468 KB	-rw-r--r--	2019-07-03 16:48	R E G D
threading.html	76.69 KB	-rw-r--r--	2019-07-03 16:48	R E G D
time.html	56.927 KB	-rw-r--r--	2019-07-03 16:48	R E G D
timeit.html	36.267 KB	-rw-r--r--	2019-07-03 16:48	R E G D
tix.html	46.959 KB	-rw-r--r--	2019-07-03 16:48	R E G D
tk.html	23.644 KB	-rw-r--r--	2019-07-03 16:48	R E G D
tkinter.html	67.666 KB	-rw-r--r--	2019-07-03 16:48	R E G D
token.html	19.617 KB	-rw-r--r--	2019-07-03 16:48	R E G D
tokenize.html	18.445 KB	-rw-r--r--	2019-07-03 16:48	R E G D
trace.html	25.535 KB	-rw-r--r--	2019-07-03 16:48	R E G D
traceback.html	33.438 KB	-rw-r--r--	2019-07-03 16:48	R E G D
ttk.html	101.749 KB	-rw-r--r--	2019-07-03 16:48	R E G D
tty.html	9.058 KB	-rw-r--r--	2019-07-03 16:48	R E G D
turtle.html	211.742 KB	-rw-r--r--	2019-07-03 16:48	R E G D
types.html	27.591 KB	-rw-r--r--	2019-07-03 16:48	R E G D
undoc.html	23.156 KB	-rw-r--r--	2019-07-03 16:48	R E G D
unicodedata.html	18.546 KB	-rw-r--r--	2019-07-03 16:48	R E G D
unittest.html	202.848 KB	-rw-r--r--	2019-07-03 16:48	R E G D
unix.html	10.551 KB	-rw-r--r--	2019-07-03 16:48	R E G D
urllib.html	58.682 KB	-rw-r--r--	2019-07-03 16:48	R E G D
urllib2.html	100.578 KB	-rw-r--r--	2019-07-03 16:48	R E G D
urlparse.html	40.414 KB	-rw-r--r--	2019-07-03 16:48	R E G D
user.html	11.826 KB	-rw-r--r--	2019-07-03 16:48	R E G D
userdict.html	29.729 KB	-rw-r--r--	2019-07-03 16:48	R E G D
uu.html	11.026 KB	-rw-r--r--	2019-07-03 16:48	R E G D
uuid.html	28.191 KB	-rw-r--r--	2019-07-03 16:48	R E G D
warnings.html	46.599 KB	-rw-r--r--	2019-07-03 16:48	R E G D
wave.html	22.216 KB	-rw-r--r--	2019-07-03 16:48	R E G D
weakref.html	36.521 KB	-rw-r--r--	2019-07-03 16:48	R E G D
webbrowser.html	23.065 KB	-rw-r--r--	2019-07-03 16:48	R E G D
whichdb.html	8.853 KB	-rw-r--r--	2019-07-03 16:48	R E G D
windows.html	9.335 KB	-rw-r--r--	2019-07-03 16:48	R E G D
winsound.html	18.747 KB	-rw-r--r--	2019-07-03 16:48	R E G D
wsgiref.html	81.043 KB	-rw-r--r--	2019-07-03 16:48	R E G D
xdrlib.html	29.94 KB	-rw-r--r--	2019-07-03 16:48	R E G D
xml.dom.html	89.044 KB	-rw-r--r--	2019-07-03 16:48	R E G D
xml.dom.minidom.html	40.42 KB	-rw-r--r--	2019-07-03 16:48	R E G D
xml.dom.pulldom.html	12.705 KB	-rw-r--r--	2019-07-03 16:48	R E G D
xml.etree.elementtree.html	93.219 KB	-rw-r--r--	2019-07-03 16:48	R E G D
xml.html	16.493 KB	-rw-r--r--	2019-07-03 16:48	R E G D
xml.sax.handler.html	38.632 KB	-rw-r--r--	2019-07-03 16:48	R E G D
xml.sax.html	20.221 KB	-rw-r--r--	2019-07-03 16:48	R E G D
xml.sax.reader.html	39.086 KB	-rw-r--r--	2019-07-03 16:48	R E G D
xml.sax.utils.html	14.257 KB	-rw-r--r--	2019-07-03 16:48	R E G D
xmlrpclib.html	60.79 KB	-rw-r--r--	2019-07-03 16:48	R E G D
zipfile.html	53.136 KB	-rw-r--r--	2019-07-03 16:48	R E G D
zipimport.html	20.425 KB	-rw-r--r--	2019-07-03 16:48	R E G D
zlib.html	25.461 KB	-rw-r--r--	2019-07-03 16:48	R E G D
REQUEST EXIT

Navigation

26.4. The Python Profilers¶

26.4.1. Introduction to the profilers¶

26.4.2. Instant User’s Manual¶

26.4.3. profile and cProfile Module Reference¶

26.4.4. The Stats Class¶

26.4.5. What Is Deterministic Profiling?¶

26.4.6. Limitations¶

26.4.7. Calibration¶

26.4.8. Using a customer timer¶

Table Of Contents

Previous topic

Next topic

This Page

Quick search

Navigation

26.4.3. `profile` and `cProfile` Module Reference¶

26.4.4. The `Stats` Class¶