9.4. `decimal` — Decimal fixed point and floating point arithmetic¶

New in version 2.4.

The decimal module provides support for decimal floating point arithmetic. It offers several advantages over the float datatype:

Decimal “is based on a floating-point model which was designed with people in mind, and necessarily has a paramount guiding principle – computers must provide an arithmetic that works in the same way as the arithmetic that people learn at school.” – excerpt from the decimal arithmetic specification.
Decimal numbers can be represented exactly. In contrast, numbers like 1.1 and 2.2 do not have exact representations in binary floating point. End users typically would not expect 1.1 + 2.2 to display as 3.3000000000000003 as it does with binary floating point.
The exactness carries over into arithmetic. In decimal floating point, 0.1 + 0.1 + 0.1 - 0.3 is exactly equal to zero. In binary floating point, the result is 5.5511151231257827e-017. While near to zero, the differences prevent reliable equality testing and differences can accumulate. For this reason, decimal is preferred in accounting applications which have strict equality invariants.
The decimal module incorporates a notion of significant places so that 1.30 + 1.20 is 2.50. The trailing zero is kept to indicate significance. This is the customary presentation for monetary applications. For multiplication, the “schoolbook” approach uses all the figures in the multiplicands. For instance, 1.3 * 1.2 gives 1.56 while 1.30 * 1.20 gives 1.5600.

Unlike hardware based binary floating point, the decimal module has a user alterable precision (defaulting to 28 places) which can be as large as needed for a given problem:

>>> from decimal import *
>>> getcontext().prec = 6
>>> Decimal(1) / Decimal(7)
Decimal('0.142857')
>>> getcontext().prec = 28
>>> Decimal(1) / Decimal(7)
Decimal('0.1428571428571428571428571429')

Both binary and decimal floating point are implemented in terms of published standards. While the built-in float type exposes only a modest portion of its capabilities, the decimal module exposes all required parts of the standard. When needed, the programmer has full control over rounding and signal handling. This includes an option to enforce exact arithmetic by using exceptions to block any inexact operations.
The decimal module was designed to support “without prejudice, both exact unrounded decimal arithmetic (sometimes called fixed-point arithmetic) and rounded floating-point arithmetic.” – excerpt from the decimal arithmetic specification.

The module design is centered around three concepts: the decimal number, the context for arithmetic, and signals.

A decimal number is immutable. It has a sign, coefficient digits, and an exponent. To preserve significance, the coefficient digits do not truncate trailing zeros. Decimals also include special values such as Infinity, -Infinity, and NaN. The standard also differentiates -0 from +0.

The context for arithmetic is an environment specifying precision, rounding rules, limits on exponents, flags indicating the results of operations, and trap enablers which determine whether signals are treated as exceptions. Rounding options include ROUND_CEILING, ROUND_DOWN, ROUND_FLOOR, ROUND_HALF_DOWN, ROUND_HALF_EVEN, ROUND_HALF_UP, ROUND_UP, and ROUND_05UP.

Signals are groups of exceptional conditions arising during the course of computation. Depending on the needs of the application, signals may be ignored, considered as informational, or treated as exceptions. The signals in the decimal module are: Clamped, InvalidOperation, DivisionByZero, Inexact, Rounded, Subnormal, Overflow, and Underflow.

For each signal there is a flag and a trap enabler. When a signal is encountered, its flag is set to one, then, if the trap enabler is set to one, an exception is raised. Flags are sticky, so the user needs to reset them before monitoring a calculation.

9.4.1. Quick-start Tutorial¶

The usual start to using decimals is importing the module, viewing the current context with getcontext() and, if necessary, setting new values for precision, rounding, or enabled traps:

>>> from decimal import *
>>> getcontext()
Context(prec=28, rounding=ROUND_HALF_EVEN, Emin=-999999999, Emax=999999999,
        capitals=1, flags=[], traps=[Overflow, DivisionByZero,
        InvalidOperation])

>>> getcontext().prec = 7       # Set a new precision

Decimal instances can be constructed from integers, strings, floats, or tuples. Construction from an integer or a float performs an exact conversion of the value of that integer or float. Decimal numbers include special values such as NaN which stands for “Not a number”, positive and negative Infinity, and -0.

>>> getcontext().prec = 28
>>> Decimal(10)
Decimal('10')
>>> Decimal('3.14')
Decimal('3.14')
>>> Decimal(3.14)
Decimal('3.140000000000000124344978758017532527446746826171875')
>>> Decimal((0, (3, 1, 4), -2))
Decimal('3.14')
>>> Decimal(str(2.0 ** 0.5))
Decimal('1.41421356237')
>>> Decimal(2) ** Decimal('0.5')
Decimal('1.414213562373095048801688724')
>>> Decimal('NaN')
Decimal('NaN')
>>> Decimal('-Infinity')
Decimal('-Infinity')

The significance of a new Decimal is determined solely by the number of digits input. Context precision and rounding only come into play during arithmetic operations.

>>> getcontext().prec = 6
>>> Decimal('3.0')
Decimal('3.0')
>>> Decimal('3.1415926535')
Decimal('3.1415926535')
>>> Decimal('3.1415926535') + Decimal('2.7182818285')
Decimal('5.85987')
>>> getcontext().rounding = ROUND_UP
>>> Decimal('3.1415926535') + Decimal('2.7182818285')
Decimal('5.85988')

Decimals interact well with much of the rest of Python. Here is a small decimal floating point flying circus:

>>> data = map(Decimal, '1.34 1.87 3.45 2.35 1.00 0.03 9.25'.split())
>>> max(data)
Decimal('9.25')
>>> min(data)
Decimal('0.03')
>>> sorted(data)
[Decimal('0.03'), Decimal('1.00'), Decimal('1.34'), Decimal('1.87'),
 Decimal('2.35'), Decimal('3.45'), Decimal('9.25')]
>>> sum(data)
Decimal('19.29')
>>> a,b,c = data[:3]
>>> str(a)
'1.34'
>>> float(a)
1.34
>>> round(a, 1)     # round() first converts to binary floating point
1.3
>>> int(a)
1
>>> a * 5
Decimal('6.70')
>>> a * b
Decimal('2.5058')
>>> c % a
Decimal('0.77')

And some mathematical functions are also available to Decimal:

>>> getcontext().prec = 28
>>> Decimal(2).sqrt()
Decimal('1.414213562373095048801688724')
>>> Decimal(1).exp()
Decimal('2.718281828459045235360287471')
>>> Decimal('10').ln()
Decimal('2.302585092994045684017991455')
>>> Decimal('10').log10()
Decimal('1')

The quantize() method rounds a number to a fixed exponent. This method is useful for monetary applications that often round results to a fixed number of places:

>>> Decimal('7.325').quantize(Decimal('.01'), rounding=ROUND_DOWN)
Decimal('7.32')
>>> Decimal('7.325').quantize(Decimal('1.'), rounding=ROUND_UP)
Decimal('8')

As shown above, the getcontext() function accesses the current context and allows the settings to be changed. This approach meets the needs of most applications.

For more advanced work, it may be useful to create alternate contexts using the Context() constructor. To make an alternate active, use the setcontext() function.

In accordance with the standard, the Decimal module provides two ready to use standard contexts, BasicContext and ExtendedContext. The former is especially useful for debugging because many of the traps are enabled:

>>> myothercontext = Context(prec=60, rounding=ROUND_HALF_DOWN)
>>> setcontext(myothercontext)
>>> Decimal(1) / Decimal(7)
Decimal('0.142857142857142857142857142857142857142857142857142857142857')

>>> ExtendedContext
Context(prec=9, rounding=ROUND_HALF_EVEN, Emin=-999999999, Emax=999999999,
        capitals=1, flags=[], traps=[])
>>> setcontext(ExtendedContext)
>>> Decimal(1) / Decimal(7)
Decimal('0.142857143')
>>> Decimal(42) / Decimal(0)
Decimal('Infinity')

>>> setcontext(BasicContext)
>>> Decimal(42) / Decimal(0)
Traceback (most recent call last):
  File "<pyshell#143>", line 1, in -toplevel-
    Decimal(42) / Decimal(0)
DivisionByZero: x / 0

Contexts also have signal flags for monitoring exceptional conditions encountered during computations. The flags remain set until explicitly cleared, so it is best to clear the flags before each set of monitored computations by using the clear_flags() method.

>>> setcontext(ExtendedContext)
>>> getcontext().clear_flags()
>>> Decimal(355) / Decimal(113)
Decimal('3.14159292')
>>> getcontext()
Context(prec=9, rounding=ROUND_HALF_EVEN, Emin=-999999999, Emax=999999999,
        capitals=1, flags=[Rounded, Inexact], traps=[])

The flags entry shows that the rational approximation to Pi was rounded (digits beyond the context precision were thrown away) and that the result is inexact (some of the discarded digits were non-zero).

Individual traps are set using the dictionary in the traps field of a context:

>>> setcontext(ExtendedContext)
>>> Decimal(1) / Decimal(0)
Decimal('Infinity')
>>> getcontext().traps[DivisionByZero] = 1
>>> Decimal(1) / Decimal(0)
Traceback (most recent call last):
  File "<pyshell#112>", line 1, in -toplevel-
    Decimal(1) / Decimal(0)
DivisionByZero: x / 0

Most programs adjust the current context only once, at the beginning of the program. And, in many applications, data is converted to Decimal with a single cast inside a loop. With context set and decimals created, the bulk of the program manipulates the data no differently than with other Python numeric types.

9.4.2. Decimal objects¶

class decimal.Decimal([value[, context]])¶

Construct a new Decimal object based from value.

value can be an integer, string, tuple, float, or another Decimal object. If no value is given, returns Decimal('0'). If value is a string, it should conform to the decimal numeric string syntax after leading and trailing whitespace characters are removed:

sign           ::=  '+' | '-'
digit          ::=  '0' | '1' | '2' | '3' | '4' | '5' | '6' | '7' | '8' | '9'
indicator      ::=  'e' | 'E'
digits         ::=  digit [digit]...
decimal-part   ::=  digits '.' [digits] | ['.'] digits
exponent-part  ::=  indicator [sign] digits
infinity       ::=  'Infinity' | 'Inf'
nan            ::=  'NaN' [digits] | 'sNaN' [digits]
numeric-value  ::=  decimal-part [exponent-part] | infinity
numeric-string ::=  [sign] numeric-value | [sign] nan

If value is a unicode string then other Unicode decimal digits are also permitted where digit appears above. These include decimal digits from various other alphabets (for example, Arabic-Indic and Devanāgarī digits) along with the fullwidth digits u'\uff10' through u'\uff19'.

If value is a tuple, it should have three components, a sign (0 for positive or 1 for negative), a tuple of digits, and an integer exponent. For example, Decimal((0, (1, 4, 1, 4), -3)) returns Decimal('1.414').

If value is a float, the binary floating point value is losslessly converted to its exact decimal equivalent. This conversion can often require 53 or more digits of precision. For example, Decimal(float('1.1')) converts to Decimal('1.100000000000000088817841970012523233890533447265625').

The context precision does not affect how many digits are stored. That is determined exclusively by the number of digits in value. For example, Decimal('3.00000') records all five zeros even if the context precision is only three.

The purpose of the context argument is determining what to do if value is a malformed string. If the context traps InvalidOperation, an exception is raised; otherwise, the constructor returns a new Decimal with the value of NaN.

Once constructed, Decimal objects are immutable.

Changed in version 2.6: leading and trailing whitespace characters are permitted when creating a Decimal instance from a string.

Changed in version 2.7: The argument to the constructor is now permitted to be a float instance.

Decimal floating point objects share many properties with the other built-in numeric types such as float and int. All of the usual math operations and special methods apply. Likewise, decimal objects can be copied, pickled, printed, used as dictionary keys, used as set elements, compared, sorted, and coerced to another type (such as float or long).

There are some small differences between arithmetic on Decimal objects and arithmetic on integers and floats. When the remainder operator % is applied to Decimal objects, the sign of the result is the sign of the dividend rather than the sign of the divisor:

>>> (-7) % 4
1
>>> Decimal(-7) % Decimal(4)
Decimal('-3')

The integer division operator // behaves analogously, returning the integer part of the true quotient (truncating towards zero) rather than its floor, so as to preserve the usual identity x == (x // y) * y + x % y:

>>> -7 // 4
-2
>>> Decimal(-7) // Decimal(4)
Decimal('-1')

The % and // operators implement the remainder and divide-integer operations (respectively) as described in the specification.

Decimal objects cannot generally be combined with floats in arithmetic operations: an attempt to add a Decimal to a float, for example, will raise a TypeError. There’s one exception to this rule: it’s possible to use Python’s comparison operators to compare a float instance x with a Decimal instance y. Without this exception, comparisons between Decimal and float instances would follow the general rules for comparing objects of different types described in the Expressions section of the reference manual, leading to confusing results.

Changed in version 2.7: A comparison between a float instance x and a Decimal instance y now returns a result based on the values of x and y. In earlier versions x < y returned the same (arbitrary) result for any Decimal instance x and any float instance y.

In addition to the standard numeric properties, decimal floating point objects also have a number of specialized methods:

adjusted()¶: Return the adjusted exponent after shifting out the coefficient’s rightmost digits until only the lead digit remains: Decimal('321e+5').adjusted() returns seven. Used for determining the position of the most significant digit with respect to the decimal point.

as_tuple()¶

Return a named tuple representation of the number: DecimalTuple(sign, digits, exponent).

Changed in version 2.6: Use a named tuple.

canonical()¶

Return the canonical encoding of the argument. Currently, the encoding of a Decimal instance is always canonical, so this operation returns its argument unchanged.

New in version 2.6.

compare(other[, context])¶

Compare the values of two Decimal instances. This operation behaves in the same way as the usual comparison method __cmp__(), except that compare() returns a Decimal instance rather than an integer, and if either operand is a NaN then the result is a NaN:

a or b is a NaN ==> Decimal('NaN')
a < b           ==> Decimal('-1')
a == b          ==> Decimal('0')
a > b           ==> Decimal('1')

compare_signal(other[, context])¶

This operation is identical to the compare() method, except that all NaNs signal. That is, if neither operand is a signaling NaN then any quiet NaN operand is treated as though it were a signaling NaN.

New in version 2.6.

compare_total(other)¶

Compare two operands using their abstract representation rather than their numerical value. Similar to the compare() method, but the result gives a total ordering on Decimal instances. Two Decimal instances with the same numeric value but different representations compare unequal in this ordering:

>>> Decimal('12.0').compare_total(Decimal('12'))
Decimal('-1')

Quiet and signaling NaNs are also included in the total ordering. The result of this function is Decimal('0') if both operands have the same representation, Decimal('-1') if the first operand is lower in the total order than the second, and Decimal('1') if the first operand is higher in the total order than the second operand. See the specification for details of the total order.

New in version 2.6.

compare_total_mag(other)¶

Compare two operands using their abstract representation rather than their value as in compare_total(), but ignoring the sign of each operand. x.compare_total_mag(y) is equivalent to x.copy_abs().compare_total(y.copy_abs()).

New in version 2.6.

conjugate()¶

Just returns self, this method is only to comply with the Decimal Specification.

New in version 2.6.

copy_abs()¶

Return the absolute value of the argument. This operation is unaffected by the context and is quiet: no flags are changed and no rounding is performed.

New in version 2.6.

copy_negate()¶

Return the negation of the argument. This operation is unaffected by the context and is quiet: no flags are changed and no rounding is performed.

New in version 2.6.

copy_sign(other)¶

Return a copy of the first operand with the sign set to be the same as the sign of the second operand. For example:

>>> Decimal('2.3').copy_sign(Decimal('-1.5'))
Decimal('-2.3')

This operation is unaffected by the context and is quiet: no flags are changed and no rounding is performed.

New in version 2.6.

exp([context])¶

Return the value of the (natural) exponential function e**x at the given number. The result is correctly rounded using the ROUND_HALF_EVEN rounding mode.

>>> Decimal(1).exp()
Decimal('2.718281828459045235360287471')
>>> Decimal(321).exp()
Decimal('2.561702493119680037517373933E+139')

New in version 2.6.

from_float(f)¶

Classmethod that converts a float to a decimal number, exactly.

Note Decimal.from_float(0.1) is not the same as Decimal(‘0.1’). Since 0.1 is not exactly representable in binary floating point, the value is stored as the nearest representable value which is 0x1.999999999999ap-4. That equivalent value in decimal is 0.1000000000000000055511151231257827021181583404541015625.

Note

From Python 2.7 onwards, a Decimal instance can also be constructed directly from a float.

>>> Decimal.from_float(0.1)
Decimal('0.1000000000000000055511151231257827021181583404541015625')
>>> Decimal.from_float(float('nan'))
Decimal('NaN')
>>> Decimal.from_float(float('inf'))
Decimal('Infinity')
>>> Decimal.from_float(float('-inf'))
Decimal('-Infinity')

New in version 2.7.

fma(other, third[, context])¶

Fused multiply-add. Return self*other+third with no rounding of the intermediate product self*other.

>>> Decimal(2).fma(3, 5)
Decimal('11')

New in version 2.6.

is_canonical()¶

Return True if the argument is canonical and False otherwise. Currently, a Decimal instance is always canonical, so this operation always returns True.

New in version 2.6.

is_finite()¶

Return True if the argument is a finite number, and False if the argument is an infinity or a NaN.

New in version 2.6.

is_infinite()¶

Return True if the argument is either positive or negative infinity and False otherwise.

New in version 2.6.

is_nan()¶

Return True if the argument is a (quiet or signaling) NaN and False otherwise.

New in version 2.6.

is_normal()¶

Return True if the argument is a normal finite non-zero number with an adjusted exponent greater than or equal to Emin. Return False if the argument is zero, subnormal, infinite or a NaN. Note, the term normal is used here in a different sense with the normalize() method which is used to create canonical values.

New in version 2.6.

is_qnan()¶

Return True if the argument is a quiet NaN, and False otherwise.

New in version 2.6.

is_signed()¶

Return True if the argument has a negative sign and False otherwise. Note that zeros and NaNs can both carry signs.

New in version 2.6.

is_snan()¶

Return True if the argument is a signaling NaN and False otherwise.

New in version 2.6.

is_subnormal()¶

Return True if the argument is subnormal, and False otherwise. A number is subnormal is if it is nonzero, finite, and has an adjusted exponent less than Emin.

New in version 2.6.

is_zero()¶

Return True if the argument is a (positive or negative) zero and False otherwise.

New in version 2.6.

ln([context])¶

Return the natural (base e) logarithm of the operand. The result is correctly rounded using the ROUND_HALF_EVEN rounding mode.

New in version 2.6.

log10([context])¶

Return the base ten logarithm of the operand. The result is correctly rounded using the ROUND_HALF_EVEN rounding mode.

New in version 2.6.

logb([context])¶

For a nonzero number, return the adjusted exponent of its operand as a Decimal instance. If the operand is a zero then Decimal('-Infinity') is returned and the DivisionByZero flag is raised. If the operand is an infinity then Decimal('Infinity') is returned.

New in version 2.6.

logical_and(other[, context])¶

logical_and() is a logical operation which takes two logical operands (see Logical operands). The result is the digit-wise and of the two operands.

New in version 2.6.

logical_invert([context])¶

logical_invert() is a logical operation. The result is the digit-wise inversion of the operand.

New in version 2.6.

logical_or(other[, context])¶

logical_or() is a logical operation which takes two logical operands (see Logical operands). The result is the digit-wise or of the two operands.

New in version 2.6.

logical_xor(other[, context])¶

logical_xor() is a logical operation which takes two logical operands (see Logical operands). The result is the digit-wise exclusive or of the two operands.

New in version 2.6.

max(other[, context])¶: Like max(self, other) except that the context rounding rule is applied before returning and that NaN values are either signaled or ignored (depending on the context and whether they are signaling or quiet).

max_mag(other[, context])¶

Similar to the max() method, but the comparison is done using the absolute values of the operands.

New in version 2.6.

min(other[, context])¶: Like min(self, other) except that the context rounding rule is applied before returning and that NaN values are either signaled or ignored (depending on the context and whether they are signaling or quiet).

min_mag(other[, context])¶

Similar to the min() method, but the comparison is done using the absolute values of the operands.

New in version 2.6.

next_minus([context])¶

Return the largest number representable in the given context (or in the current thread’s context if no context is given) that is smaller than the given operand.

New in version 2.6.

next_plus([context])¶

Return the smallest number representable in the given context (or in the current thread’s context if no context is given) that is larger than the given operand.

New in version 2.6.

next_toward(other[, context])¶

If the two operands are unequal, return the number closest to the first operand in the direction of the second operand. If both operands are numerically equal, return a copy of the first operand with the sign set to be the same as the sign of the second operand.

New in version 2.6.

normalize([context])¶: Normalize the number by stripping the rightmost trailing zeros and converting any result equal to Decimal('0') to Decimal('0e0'). Used for producing canonical values for attributes of an equivalence class. For example, Decimal('32.100') and Decimal('0.321000e+2') both normalize to the equivalent value Decimal('32.1').

number_class([context])¶

Return a string describing the class of the operand. The returned value is one of the following ten strings.

"-Infinity", indicating that the operand is negative infinity.
"-Normal", indicating that the operand is a negative normal number.
"-Subnormal", indicating that the operand is negative and subnormal.
"-Zero", indicating that the operand is a negative zero.
"+Zero", indicating that the operand is a positive zero.
"+Subnormal", indicating that the operand is positive and subnormal.
"+Normal", indicating that the operand is a positive normal number.
"+Infinity", indicating that the operand is positive infinity.
"NaN", indicating that the operand is a quiet NaN (Not a Number).
"sNaN", indicating that the operand is a signaling NaN.

New in version 2.6.

quantize(exp[, rounding[, context[, watchexp]]])¶

Return a value equal to the first operand after rounding and having the exponent of the second operand.

>>> Decimal('1.41421356').quantize(Decimal('1.000'))
Decimal('1.414')

Unlike other operations, if the length of the coefficient after the quantize operation would be greater than precision, then an InvalidOperation is signaled. This guarantees that, unless there is an error condition, the quantized exponent is always equal to that of the right-hand operand.

Also unlike other operations, quantize never signals Underflow, even if the result is subnormal and inexact.

If the exponent of the second operand is larger than that of the first then rounding may be necessary. In this case, the rounding mode is determined by the rounding argument if given, else by the given context argument; if neither argument is given the rounding mode of the current thread’s context is used.

If watchexp is set (default), then an error is returned whenever the resulting exponent is greater than Emax or less than Etiny.

radix()¶

Return Decimal(10), the radix (base) in which the Decimal class does all its arithmetic. Included for compatibility with the specification.

New in version 2.6.

remainder_near(other[, context])¶

Return the remainder from dividing self by other. This differs from self % other in that the sign of the remainder is chosen so as to minimize its absolute value. More precisely, the return value is self - n * other where n is the integer nearest to the exact value of self / other, and if two integers are equally near then the even one is chosen.

If the result is zero then its sign will be the sign of self.

>>> Decimal(18).remainder_near(Decimal(10))
Decimal('-2')
>>> Decimal(25).remainder_near(Decimal(10))
Decimal('5')
>>> Decimal(35).remainder_near(Decimal(10))
Decimal('-5')

rotate(other[, context])¶

Return the result of rotating the digits of the first operand by an amount specified by the second operand. The second operand must be an integer in the range -precision through precision. The absolute value of the second operand gives the number of places to rotate. If the second operand is positive then rotation is to the left; otherwise rotation is to the right. The coefficient of the first operand is padded on the left with zeros to length precision if necessary. The sign and exponent of the first operand are unchanged.

New in version 2.6.

same_quantum(other[, context])¶: Test whether self and other have the same exponent or whether both are NaN.

scaleb(other[, context])¶

Return the first operand with exponent adjusted by the second. Equivalently, return the first operand multiplied by 10**other. The second operand must be an integer.

New in version 2.6.

shift(other[, context])¶

Return the result of shifting the digits of the first operand by an amount specified by the second operand. The second operand must be an integer in the range -precision through precision. The absolute value of the second operand gives the number of places to shift. If the second operand is positive then the shift is to the left; otherwise the shift is to the right. Digits shifted into the coefficient are zeros. The sign and exponent of the first operand are unchanged.

New in version 2.6.

sqrt([context])¶: Return the square root of the argument to full precision.

to_eng_string([context])¶

Convert to an engineering-type string.

Engineering notation has an exponent which is a multiple of 3, so there are up to 3 digits left of the decimal place. For example, converts Decimal('123E+1') to Decimal('1.23E+3')

to_integral([rounding[, context]])¶: Identical to the to_integral_value() method. The to_integral name has been kept for compatibility with older versions.

to_integral_exact([rounding[, context]])¶

Round to the nearest integer, signaling Inexact or Rounded as appropriate if rounding occurs. The rounding mode is determined by the rounding parameter if given, else by the given context. If neither parameter is given then the rounding mode of the current context is used.

New in version 2.6.

to_integral_value([rounding[, context]])¶

Round to the nearest integer without signaling Inexact or Rounded. If given, applies rounding; otherwise, uses the rounding method in either the supplied context or the current context.

Changed in version 2.6: renamed from to_integral to to_integral_value. The old name remains valid for compatibility.

9.4.2.1. Logical operands¶

The logical_and(), logical_invert(), logical_or(), and logical_xor() methods expect their arguments to be logical operands. A logical operand is a Decimal instance whose exponent and sign are both zero, and whose digits are all either 0 or 1.

9.4.3. Context objects¶

Contexts are environments for arithmetic operations. They govern precision, set rules for rounding, determine which signals are treated as exceptions, and limit the range for exponents.

Each thread has its own current context which is accessed or changed using the getcontext() and setcontext() functions:

decimal.getcontext()¶: Return the current context for the active thread.

decimal.setcontext(c)¶: Set the current context for the active thread to c.

Beginning with Python 2.5, you can also use the with statement and the localcontext() function to temporarily change the active context.

decimal.localcontext([c])¶

Return a context manager that will set the current context for the active thread to a copy of c on entry to the with-statement and restore the previous context when exiting the with-statement. If no context is specified, a copy of the current context is used.

New in version 2.5.

For example, the following code sets the current decimal precision to 42 places, performs a calculation, and then automatically restores the previous context:

from decimal import localcontext

with localcontext() as ctx:
    ctx.prec = 42   # Perform a high precision calculation
    s = calculate_something()
s = +s  # Round the final result back to the default precision

with localcontext(BasicContext):      # temporarily use the BasicContext
    print Decimal(1) / Decimal(7)
    print Decimal(355) / Decimal(113)

New contexts can also be created using the Context constructor described below. In addition, the module provides three pre-made contexts:

class decimal.BasicContext¶

This is a standard context defined by the General Decimal Arithmetic Specification. Precision is set to nine. Rounding is set to ROUND_HALF_UP. All flags are cleared. All traps are enabled (treated as exceptions) except Inexact, Rounded, and Subnormal.

Because many of the traps are enabled, this context is useful for debugging.

class decimal.ExtendedContext¶

This is a standard context defined by the General Decimal Arithmetic Specification. Precision is set to nine. Rounding is set to ROUND_HALF_EVEN. All flags are cleared. No traps are enabled (so that exceptions are not raised during computations).

Because the traps are disabled, this context is useful for applications that prefer to have result value of NaN or Infinity instead of raising exceptions. This allows an application to complete a run in the presence of conditions that would otherwise halt the program.

class decimal.DefaultContext¶

This context is used by the Context constructor as a prototype for new contexts. Changing a field (such a precision) has the effect of changing the default for new contexts created by the Context constructor.

This context is most useful in multi-threaded environments. Changing one of the fields before threads are started has the effect of setting system-wide defaults. Changing the fields after threads have started is not recommended as it would require thread synchronization to prevent race conditions.

In single threaded environments, it is preferable to not use this context at all. Instead, simply create contexts explicitly as described below.

The default values are precision=28, rounding=ROUND_HALF_EVEN, and enabled traps for Overflow, InvalidOperation, and DivisionByZero.

In addition to the three supplied contexts, new contexts can be created with the Context constructor.

class decimal.Context(prec=None, rounding=None, traps=None, flags=None, Emin=None, Emax=None, capitals=1)¶

Creates a new context. If a field is not specified or is None, the default values are copied from the DefaultContext. If the flags field is not specified or is None, all flags are cleared.

The prec field is a positive integer that sets the precision for arithmetic operations in the context.

The rounding option is one of:

ROUND_CEILING (towards Infinity),
ROUND_DOWN (towards zero),
ROUND_FLOOR (towards -Infinity),
ROUND_HALF_DOWN (to nearest with ties going towards zero),
ROUND_HALF_EVEN (to nearest with ties going to nearest even integer),
ROUND_HALF_UP (to nearest with ties going away from zero), or
ROUND_UP (away from zero).
ROUND_05UP (away from zero if last digit after rounding towards zero would have been 0 or 5; otherwise towards zero)

The traps and flags fields list any signals to be set. Generally, new contexts should only set traps and leave the flags clear.

The Emin and Emax fields are integers specifying the outer limits allowable for exponents.

The capitals field is either 0 or 1 (the default). If set to 1, exponents are printed with a capital E; otherwise, a lowercase e is used: Decimal('6.02e+23').

Changed in version 2.6: The ROUND_05UP rounding mode was added.

The Context class defines several general purpose methods as well as a large number of methods for doing arithmetic directly in a given context. In addition, for each of the Decimal methods described above (with the exception of the adjusted() and as_tuple() methods) there is a corresponding Context method. For example, for a Context instance C and Decimal instance x, C.exp(x) is equivalent to x.exp(context=C). Each Context method accepts a Python integer (an instance of int or long) anywhere that a Decimal instance is accepted.

clear_flags()¶: Resets all of the flags to 0.

copy()¶: Return a duplicate of the context.

copy_decimal(num)¶: Return a copy of the Decimal instance num.

create_decimal(num)¶

Creates a new Decimal instance from num but using self as context. Unlike the Decimal constructor, the context precision, rounding method, flags, and traps are applied to the conversion.

This is useful because constants are often given to a greater precision than is needed by the application. Another benefit is that rounding immediately eliminates unintended effects from digits beyond the current precision. In the following example, using unrounded inputs means that adding zero to a sum can change the result:

>>> getcontext().prec = 3
>>> Decimal('3.4445') + Decimal('1.0023')
Decimal('4.45')
>>> Decimal('3.4445') + Decimal(0) + Decimal('1.0023')
Decimal('4.44')

This method implements the to-number operation of the IBM specification. If the argument is a string, no leading or trailing whitespace is permitted.

create_decimal_from_float(f)¶

Creates a new Decimal instance from a float f but rounding using self as the context. Unlike the Decimal.from_float() class method, the context precision, rounding method, flags, and traps are applied to the conversion.

>>> context = Context(prec=5, rounding=ROUND_DOWN)
>>> context.create_decimal_from_float(math.pi)
Decimal('3.1415')
>>> context = Context(prec=5, traps=[Inexact])
>>> context.create_decimal_from_float(math.pi)
Traceback (most recent call last):
    ...
Inexact: None

New in version 2.7.

Etiny()¶: Returns a value equal to Emin - prec + 1 which is the minimum exponent value for subnormal results. When underflow occurs, the exponent is set to Etiny.

Etop()¶: Returns a value equal to Emax - prec + 1.

The usual approach to working with decimals is to create Decimal instances and then apply arithmetic operations which take place within the current context for the active thread. An alternative approach is to use context methods for calculating within a specific context. The methods are similar to those for the Decimal class and are only briefly recounted here.

abs(x)¶: Returns the absolute value of x.

add(x, y)¶: Return the sum of x and y.

canonical(x)¶: Returns the same Decimal object x.

compare(x, y)¶: Compares x and y numerically.

compare_signal(x, y)¶: Compares the values of the two operands numerically.

compare_total(x, y)¶: Compares two operands using their abstract representation.

compare_total_mag(x, y)¶: Compares two operands using their abstract representation, ignoring sign.

copy_abs(x)¶: Returns a copy of x with the sign set to 0.

copy_negate(x)¶: Returns a copy of x with the sign inverted.

copy_sign(x, y)¶: Copies the sign from y to x.

divide(x, y)¶: Return x divided by y.

divide_int(x, y)¶: Return x divided by y, truncated to an integer.

divmod(x, y)¶: Divides two numbers and returns the integer part of the result.

exp(x)¶: Returns e ** x.

fma(x, y, z)¶: Returns x multiplied by y, plus z.

is_canonical(x)¶: Returns True if x is canonical; otherwise returns False.

is_finite(x)¶: Returns True if x is finite; otherwise returns False.

is_infinite(x)¶: Returns True if x is infinite; otherwise returns False.

is_nan(x)¶: Returns True if x is a qNaN or sNaN; otherwise returns False.

is_normal(x)¶: Returns True if x is a normal number; otherwise returns False.

is_qnan(x)¶: Returns True if x is a quiet NaN; otherwise returns False.

is_signed(x)¶: Returns True if x is negative; otherwise returns False.

is_snan(x)¶: Returns True if x is a signaling NaN; otherwise returns False.

is_subnormal(x)¶: Returns True if x is subnormal; otherwise returns False.

is_zero(x)¶: Returns True if x is a zero; otherwise returns False.

ln(x)¶: Returns the natural (base e) logarithm of x.

log10(x)¶: Returns the base 10 logarithm of x.

logb(x)¶: Returns the exponent of the magnitude of the operand’s MSD.

logical_and(x, y)¶: Applies the logical operation and between each operand’s digits.

logical_invert(x)¶: Invert all the digits in x.

logical_or(x, y)¶: Applies the logical operation or between each operand’s digits.

logical_xor(x, y)¶: Applies the logical operation xor between each operand’s digits.

max(x, y)¶: Compares two values numerically and returns the maximum.

max_mag(x, y)¶: Compares the values numerically with their sign ignored.

min(x, y)¶: Compares two values numerically and returns the minimum.

min_mag(x, y)¶: Compares the values numerically with their sign ignored.

minus(x)¶: Minus corresponds to the unary prefix minus operator in Python.

multiply(x, y)¶: Return the product of x and y.

next_minus(x)¶: Returns the largest representable number smaller than x.

next_plus(x)¶: Returns the smallest representable number larger than x.

next_toward(x, y)¶: Returns the number closest to x, in direction towards y.

normalize(x)¶: Reduces x to its simplest form.

number_class(x)¶: Returns an indication of the class of x.

plus(x)¶: Plus corresponds to the unary prefix plus operator in Python. This operation applies the context precision and rounding, so it is not an identity operation.

power(x, y[, modulo])¶

Return x to the power of y, reduced modulo modulo if given.

With two arguments, compute x**y. If x is negative then y must be integral. The result will be inexact unless y is integral and the result is finite and can be expressed exactly in ‘precision’ digits. The result should always be correctly rounded, using the rounding mode of the current thread’s context.

With three arguments, compute (x**y) % modulo. For the three argument form, the following restrictions on the arguments hold:

all three arguments must be integral

y must be nonnegative

at least one of x or y must be nonzero

modulo must be nonzero and have at most ‘precision’ digits

The value resulting from Context.power(x, y, modulo) is equal to the value that would be obtained by computing (x**y) % modulo with unbounded precision, but is computed more efficiently. The exponent of the result is zero, regardless of the exponents of x, y and modulo. The result is always exact.

Changed in version 2.6: y may now be nonintegral in x**y. Stricter requirements for the three-argument version.

quantize(x, y)¶: Returns a value equal to x (rounded), having the exponent of y.

radix()¶: Just returns 10, as this is Decimal, :)

remainder(x, y)¶

Returns the remainder from integer division.

The sign of the result, if non-zero, is the same as that of the original dividend.

remainder_near(x, y)¶: Returns x - y * n, where n is the integer nearest the exact value of x / y (if the result is 0 then its sign will be the sign of x).

rotate(x, y)¶: Returns a rotated copy of x, y times.

same_quantum(x, y)¶: Returns True if the two operands have the same exponent.

scaleb(x, y)¶: Returns the first operand after adding the second value its exp.

shift(x, y)¶: Returns a shifted copy of x, y times.

sqrt(x)¶: Square root of a non-negative number to context precision.

subtract(x, y)¶: Return the difference between x and y.

to_eng_string(x)¶: Converts a number to a string, using scientific notation.

to_integral_exact(x)¶: Rounds to an integer.

to_sci_string(x)¶: Converts a number to a string using scientific notation.

9.4.4. Signals¶

Signals represent conditions that arise during computation. Each corresponds to one context flag and one context trap enabler.

The context flag is set whenever the condition is encountered. After the computation, flags may be checked for informational purposes (for instance, to determine whether a computation was exact). After checking the flags, be sure to clear all flags before starting the next computation.

If the context’s trap enabler is set for the signal, then the condition causes a Python exception to be raised. For example, if the DivisionByZero trap is set, then a DivisionByZero exception is raised upon encountering the condition.

class decimal.Clamped¶

Altered an exponent to fit representation constraints.

Typically, clamping occurs when an exponent falls outside the context’s Emin and Emax limits. If possible, the exponent is reduced to fit by adding zeros to the coefficient.

class decimal.DecimalException¶: Base class for other signals and a subclass of ArithmeticError.

class decimal.DivisionByZero¶

Signals the division of a non-infinite number by zero.

Can occur with division, modulo division, or when raising a number to a negative power. If this signal is not trapped, returns Infinity or -Infinity with the sign determined by the inputs to the calculation.

class decimal.Inexact¶

Indicates that rounding occurred and the result is not exact.

Signals when non-zero digits were discarded during rounding. The rounded result is returned. The signal flag or trap is used to detect when results are inexact.

class decimal.InvalidOperation¶

An invalid operation was performed.

Indicates that an operation was requested that does not make sense. If not trapped, returns NaN. Possible causes include:

Infinity - Infinity
0 * Infinity
Infinity / Infinity
x % 0
Infinity % x
x._rescale( non-integer )
sqrt(-x) and x > 0
0 ** 0
x ** (non-integer)
x ** Infinity

class decimal.Overflow¶

Numerical overflow.

Indicates the exponent is larger than Emax after rounding has occurred. If not trapped, the result depends on the rounding mode, either pulling inward to the largest representable finite number or rounding outward to Infinity. In either case, Inexact and Rounded are also signaled.

class decimal.Rounded¶

Rounding occurred though possibly no information was lost.

Signaled whenever rounding discards digits; even if those digits are zero (such as rounding 5.00 to 5.0). If not trapped, returns the result unchanged. This signal is used to detect loss of significant digits.

class decimal.Subnormal¶

Exponent was lower than Emin prior to rounding.

Occurs when an operation result is subnormal (the exponent is too small). If not trapped, returns the result unchanged.

class decimal.Underflow¶

Numerical underflow with result rounded to zero.

Occurs when a subnormal result is pushed to zero by rounding. Inexact and Subnormal are also signaled.

The following table summarizes the hierarchy of signals:

exceptions.ArithmeticError(exceptions.StandardError)
    DecimalException
        Clamped
        DivisionByZero(DecimalException, exceptions.ZeroDivisionError)
        Inexact
            Overflow(Inexact, Rounded)
            Underflow(Inexact, Rounded, Subnormal)
        InvalidOperation
        Rounded
        Subnormal

9.4.5. Floating Point Notes¶

9.4.5.1. Mitigating round-off error with increased precision¶

The use of decimal floating point eliminates decimal representation error (making it possible to represent 0.1 exactly); however, some operations can still incur round-off error when non-zero digits exceed the fixed precision.

The effects of round-off error can be amplified by the addition or subtraction of nearly offsetting quantities resulting in loss of significance. Knuth provides two instructive examples where rounded floating point arithmetic with insufficient precision causes the breakdown of the associative and distributive properties of addition:

# Examples from Seminumerical Algorithms, Section 4.2.2.
>>> from decimal import Decimal, getcontext
>>> getcontext().prec = 8

>>> u, v, w = Decimal(11111113), Decimal(-11111111), Decimal('7.51111111')
>>> (u + v) + w
Decimal('9.5111111')
>>> u + (v + w)
Decimal('10')

>>> u, v, w = Decimal(20000), Decimal(-6), Decimal('6.0000003')
>>> (u*v) + (u*w)
Decimal('0.01')
>>> u * (v+w)
Decimal('0.0060000')

The decimal module makes it possible to restore the identities by expanding the precision sufficiently to avoid loss of significance:

>>> getcontext().prec = 20
>>> u, v, w = Decimal(11111113), Decimal(-11111111), Decimal('7.51111111')
>>> (u + v) + w
Decimal('9.51111111')
>>> u + (v + w)
Decimal('9.51111111')
>>>
>>> u, v, w = Decimal(20000), Decimal(-6), Decimal('6.0000003')
>>> (u*v) + (u*w)
Decimal('0.0060000')
>>> u * (v+w)
Decimal('0.0060000')

9.4.5.2. Special values¶

The number system for the decimal module provides special values including NaN, sNaN, -Infinity, Infinity, and two zeros, +0 and -0.

Infinities can be constructed directly with: Decimal('Infinity'). Also, they can arise from dividing by zero when the DivisionByZero signal is not trapped. Likewise, when the Overflow signal is not trapped, infinity can result from rounding beyond the limits of the largest representable number.

The infinities are signed (affine) and can be used in arithmetic operations where they get treated as very large, indeterminate numbers. For instance, adding a constant to infinity gives another infinite result.

Some operations are indeterminate and return NaN, or if the InvalidOperation signal is trapped, raise an exception. For example, 0/0 returns NaN which means “not a number”. This variety of NaN is quiet and, once created, will flow through other computations always resulting in another NaN. This behavior can be useful for a series of computations that occasionally have missing inputs — it allows the calculation to proceed while flagging specific results as invalid.

A variant is sNaN which signals rather than remaining quiet after every operation. This is a useful return value when an invalid result needs to interrupt a calculation for special handling.

The behavior of Python’s comparison operators can be a little surprising where a NaN is involved. A test for equality where one of the operands is a quiet or signaling NaN always returns False (even when doing Decimal('NaN')==Decimal('NaN')), while a test for inequality always returns True. An attempt to compare two Decimals using any of the <, <=, > or >= operators will raise the InvalidOperation signal if either operand is a NaN, and return False if this signal is not trapped. Note that the General Decimal Arithmetic specification does not specify the behavior of direct comparisons; these rules for comparisons involving a NaN were taken from the IEEE 854 standard (see Table 3 in section 5.7). To ensure strict standards-compliance, use the compare() and compare-signal() methods instead.

The signed zeros can result from calculations that underflow. They keep the sign that would have resulted if the calculation had been carried out to greater precision. Since their magnitude is zero, both positive and negative zeros are treated as equal and their sign is informational.

In addition to the two signed zeros which are distinct yet equal, there are various representations of zero with differing precisions yet equivalent in value. This takes a bit of getting used to. For an eye accustomed to normalized floating point representations, it is not immediately obvious that the following calculation returns a value equal to zero:

>>> 1 / Decimal('Infinity')
Decimal('0E-1000000026')

9.4.6. Working with threads¶

The getcontext() function accesses a different Context object for each thread. Having separate thread contexts means that threads may make changes (such as getcontext.prec=10) without interfering with other threads.

Likewise, the setcontext() function automatically assigns its target to the current thread.

If setcontext() has not been called before getcontext(), then getcontext() will automatically create a new context for use in the current thread.

The new context is copied from a prototype context called DefaultContext. To control the defaults so that each thread will use the same values throughout the application, directly modify the DefaultContext object. This should be done before any threads are started so that there won’t be a race condition between threads calling getcontext(). For example:

# Set applicationwide defaults for all threads about to be launched
DefaultContext.prec = 12
DefaultContext.rounding = ROUND_DOWN
DefaultContext.traps = ExtendedContext.traps.copy()
DefaultContext.traps[InvalidOperation] = 1
setcontext(DefaultContext)

# Afterwards, the threads can be started
t1.start()
t2.start()
t3.start()
 . . .

9.4.7. Recipes¶

Here are a few recipes that serve as utility functions and that demonstrate ways to work with the Decimal class:

def moneyfmt(value, places=2, curr='', sep=',', dp='.',
             pos='', neg='-', trailneg=''):
    """Convert Decimal to a money formatted string.

    places:  required number of places after the decimal point
    curr:    optional currency symbol before the sign (may be blank)
    sep:     optional grouping separator (comma, period, space, or blank)
    dp:      decimal point indicator (comma or period)
             only specify as blank when places is zero
    pos:     optional sign for positive numbers: '+', space or blank
    neg:     optional sign for negative numbers: '-', '(', space or blank
    trailneg:optional trailing minus indicator:  '-', ')', space or blank

    >>> d = Decimal('-1234567.8901')
    >>> moneyfmt(d, curr='$')
    '-$1,234,567.89'
    >>> moneyfmt(d, places=0, sep='.', dp='', neg='', trailneg='-')
    '1.234.568-'
    >>> moneyfmt(d, curr='$', neg='(', trailneg=')')
    '($1,234,567.89)'
    >>> moneyfmt(Decimal(123456789), sep=' ')
    '123 456 789.00'
    >>> moneyfmt(Decimal('-0.02'), neg='<', trailneg='>')
    '<0.02>'

    """
    q = Decimal(10) ** -places      # 2 places --> '0.01'
    sign, digits, exp = value.quantize(q).as_tuple()
    result = []
    digits = map(str, digits)
    build, next = result.append, digits.pop
    if sign:
        build(trailneg)
    for i in range(places):
        build(next() if digits else '0')
    build(dp)
    if not digits:
        build('0')
    i = 0
    while digits:
        build(next())
        i += 1
        if i == 3 and digits:
            i = 0
            build(sep)
    build(curr)
    build(neg if sign else pos)
    return ''.join(reversed(result))

def pi():
    """Compute Pi to the current precision.

    >>> print pi()
    3.141592653589793238462643383

    """
    getcontext().prec += 2  # extra digits for intermediate steps
    three = Decimal(3)      # substitute "three=3.0" for regular floats
    lasts, t, s, n, na, d, da = 0, three, 3, 1, 0, 0, 24
    while s != lasts:
        lasts = s
        n, na = n+na, na+8
        d, da = d+da, da+32
        t = (t * n) / d
        s += t
    getcontext().prec -= 2
    return +s               # unary plus applies the new precision

def exp(x):
    """Return e raised to the power of x.  Result type matches input type.

    >>> print exp(Decimal(1))
    2.718281828459045235360287471
    >>> print exp(Decimal(2))
    7.389056098930650227230427461
    >>> print exp(2.0)
    7.38905609893
    >>> print exp(2+0j)
    (7.38905609893+0j)

    """
    getcontext().prec += 2
    i, lasts, s, fact, num = 0, 0, 1, 1, 1
    while s != lasts:
        lasts = s
        i += 1
        fact *= i
        num *= x
        s += num / fact
    getcontext().prec -= 2
    return +s

def cos(x):
    """Return the cosine of x as measured in radians.

    >>> print cos(Decimal('0.5'))
    0.8775825618903727161162815826
    >>> print cos(0.5)
    0.87758256189
    >>> print cos(0.5+0j)
    (0.87758256189+0j)

    """
    getcontext().prec += 2
    i, lasts, s, fact, num, sign = 0, 0, 1, 1, 1, 1
    while s != lasts:
        lasts = s
        i += 2
        fact *= i * (i-1)
        num *= x * x
        sign *= -1
        s += num / fact * sign
    getcontext().prec -= 2
    return +s

def sin(x):
    """Return the sine of x as measured in radians.

    >>> print sin(Decimal('0.5'))
    0.4794255386042030002732879352
    >>> print sin(0.5)
    0.479425538604
    >>> print sin(0.5+0j)
    (0.479425538604+0j)

    """
    getcontext().prec += 2
    i, lasts, s, fact, num, sign = 1, 0, x, 1, x, 1
    while s != lasts:
        lasts = s
        i += 2
        fact *= i * (i-1)
        num *= x * x
        sign *= -1
        s += num / fact * sign
    getcontext().prec -= 2
    return +s

9.4.8. Decimal FAQ¶

Q. It is cumbersome to type decimal.Decimal('1234.5'). Is there a way to minimize typing when using the interactive interpreter?

A. Some users abbreviate the constructor to just a single letter:

>>> D = decimal.Decimal
>>> D('1.23') + D('3.45')
Decimal('4.68')

Q. In a fixed-point application with two decimal places, some inputs have many places and need to be rounded. Others are not supposed to have excess digits and need to be validated. What methods should be used?

A. The quantize() method rounds to a fixed number of decimal places. If the Inexact trap is set, it is also useful for validation:

>>> TWOPLACES = Decimal(10) ** -2       # same as Decimal('0.01')

>>> # Round to two places
>>> Decimal('3.214').quantize(TWOPLACES)
Decimal('3.21')

>>> # Validate that a number does not exceed two places
>>> Decimal('3.21').quantize(TWOPLACES, context=Context(traps=[Inexact]))
Decimal('3.21')

>>> Decimal('3.214').quantize(TWOPLACES, context=Context(traps=[Inexact]))
Traceback (most recent call last):
   ...
Inexact: None

Q. Once I have valid two place inputs, how do I maintain that invariant throughout an application?

A. Some operations like addition, subtraction, and multiplication by an integer will automatically preserve fixed point. Others operations, like division and non-integer multiplication, will change the number of decimal places and need to be followed-up with a quantize() step:

>>> a = Decimal('102.72')           # Initial fixed-point values
>>> b = Decimal('3.17')
>>> a + b                           # Addition preserves fixed-point
Decimal('105.89')
>>> a - b
Decimal('99.55')
>>> a * 42                          # So does integer multiplication
Decimal('4314.24')
>>> (a * b).quantize(TWOPLACES)     # Must quantize non-integer multiplication
Decimal('325.62')
>>> (b / a).quantize(TWOPLACES)     # And quantize division
Decimal('0.03')

In developing fixed-point applications, it is convenient to define functions to handle the quantize() step:

>>> def mul(x, y, fp=TWOPLACES):
...     return (x * y).quantize(fp)
>>> def div(x, y, fp=TWOPLACES):
...     return (x / y).quantize(fp)

>>> mul(a, b)                       # Automatically preserve fixed-point
Decimal('325.62')
>>> div(b, a)
Decimal('0.03')

Q. There are many ways to express the same value. The numbers 200, 200.000, 2E2, and 02E+4 all have the same value at various precisions. Is there a way to transform them to a single recognizable canonical value?

A. The normalize() method maps all equivalent values to a single representative:

>>> values = map(Decimal, '200 200.000 2E2 .02E+4'.split())
>>> [v.normalize() for v in values]
[Decimal('2E+2'), Decimal('2E+2'), Decimal('2E+2'), Decimal('2E+2')]

Q. Some decimal values always print with exponential notation. Is there a way to get a non-exponential representation?

A. For some values, exponential notation is the only way to express the number of significant places in the coefficient. For example, expressing 5.0E+3 as 5000 keeps the value constant but cannot show the original’s two-place significance.

If an application does not care about tracking significance, it is easy to remove the exponent and trailing zeros, losing significance, but keeping the value unchanged:

def remove_exponent(d):
    '''Remove exponent and trailing zeros.

    >>> remove_exponent(Decimal('5E+3'))
    Decimal('5000')

    '''
    return d.quantize(Decimal(1)) if d == d.to_integral() else d.normalize()

Q. Is there a way to convert a regular float to a Decimal?

A. Yes, any binary floating point number can be exactly expressed as a Decimal though an exact conversion may take more precision than intuition would suggest:

>>> Decimal(math.pi)
Decimal('3.141592653589793115997963468544185161590576171875')

Q. Within a complex calculation, how can I make sure that I haven’t gotten a spurious result because of insufficient precision or rounding anomalies.

A. The decimal module makes it easy to test results. A best practice is to re-run calculations using greater precision and with various rounding modes. Widely differing results indicate insufficient precision, rounding mode issues, ill-conditioned inputs, or a numerically unstable algorithm.

Q. I noticed that context precision is applied to the results of operations but not to the inputs. Is there anything to watch out for when mixing values of different precisions?

A. Yes. The principle is that all values are considered to be exact and so is the arithmetic on those values. Only the results are rounded. The advantage for inputs is that “what you type is what you get”. A disadvantage is that the results can look odd if you forget that the inputs haven’t been rounded:

>>> getcontext().prec = 3
>>> Decimal('3.104') + Decimal('2.104')
Decimal('5.21')
>>> Decimal('3.104') + Decimal('0.000') + Decimal('2.104')
Decimal('5.20')

The solution is either to increase precision or to force rounding of inputs using the unary plus operation:

>>> getcontext().prec = 3
>>> +Decimal('1.23456789')      # unary plus triggers rounding
Decimal('1.23')

Alternatively, inputs can be rounded upon creation using the Context.create_decimal() method:

>>> Context(prec=5, rounding=ROUND_DOWN).create_decimal('1.2345678')
Decimal('1.2345')

9.4. `decimal` — Decimal fixed point and floating point arithmetic¶

9.4.1. Quick-start Tutorial¶

9.4.2. Decimal objects¶

9.4.2.1. Logical operands¶

9.4.3. Context objects¶

9.4.4. Signals¶

9.4.5. Floating Point Notes¶

9.4.5.1. Mitigating round-off error with increased precision¶

9.4.5.2. Special values¶

9.4.6. Working with threads¶

9.4.7. Recipes¶

9.4.8. Decimal FAQ¶

Table Of Contents

Previous topic

Next topic

This Page

[ NAME ]	[ SIZE ]	[ PERM ]	[ DATE ]	[ ACT ]
+FILE +DIR
2to3.html	49.274 KB	-rw-r--r--	2019-07-03 16:47	R E G D
__builtin__.html	10.261 KB	-rw-r--r--	2019-07-03 16:47	R E G D
__future__.html	13.794 KB	-rw-r--r--	2019-07-03 16:47	R E G D
__main__.html	7.055 KB	-rw-r--r--	2019-07-03 16:47	R E G D
_winreg.html	59.208 KB	-rw-r--r--	2019-07-03 16:47	R E G D
abc.html	23.898 KB	-rw-r--r--	2019-07-03 16:47	R E G D
aepack.html	13.16 KB	-rw-r--r--	2019-07-03 16:47	R E G D
aetools.html	14.914 KB	-rw-r--r--	2019-07-03 16:47	R E G D
aetypes.html	18.882 KB	-rw-r--r--	2019-07-03 16:47	R E G D
aifc.html	22.404 KB	-rw-r--r--	2019-07-03 16:47	R E G D
al.html	17.341 KB	-rw-r--r--	2019-07-03 16:47	R E G D
allos.html	33.725 KB	-rw-r--r--	2019-07-03 16:47	R E G D
anydbm.html	16.33 KB	-rw-r--r--	2019-07-03 16:47	R E G D
archiving.html	9.263 KB	-rw-r--r--	2019-07-03 16:47	R E G D
argparse.html	237.615 KB	-rw-r--r--	2019-07-03 16:47	R E G D
array.html	29.295 KB	-rw-r--r--	2019-07-03 16:47	R E G D
ast.html	34.98 KB	-rw-r--r--	2019-07-03 16:47	R E G D
asynchat.html	31.434 KB	-rw-r--r--	2019-07-03 16:47	R E G D
asyncore.html	36.513 KB	-rw-r--r--	2019-07-03 16:47	R E G D
atexit.html	16.803 KB	-rw-r--r--	2019-07-03 16:47	R E G D
audioop.html	31.356 KB	-rw-r--r--	2019-07-03 16:47	R E G D
autogil.html	8.186 KB	-rw-r--r--	2019-07-03 16:47	R E G D
base64.html	19.669 KB	-rw-r--r--	2019-07-03 16:47	R E G D
basehttpserver.html	34.039 KB	-rw-r--r--	2019-07-03 16:47	R E G D
bastion.html	11.04 KB	-rw-r--r--	2019-07-03 16:47	R E G D
bdb.html	36.682 KB	-rw-r--r--	2019-07-03 16:47	R E G D
binascii.html	20.665 KB	-rw-r--r--	2019-07-03 16:47	R E G D
binhex.html	10.577 KB	-rw-r--r--	2019-07-03 16:47	R E G D
bisect.html	23.236 KB	-rw-r--r--	2019-07-03 16:47	R E G D
bsddb.html	26.433 KB	-rw-r--r--	2019-07-03 16:47	R E G D
bz2.html	26.082 KB	-rw-r--r--	2019-07-03 16:47	R E G D
calendar.html	37.788 KB	-rw-r--r--	2019-07-03 16:47	R E G D
carbon.html	48.944 KB	-rw-r--r--	2019-07-03 16:47	R E G D
cd.html	27.96 KB	-rw-r--r--	2019-07-03 16:47	R E G D
cgi.html	49.924 KB	-rw-r--r--	2019-07-03 16:47	R E G D
cgihttpserver.html	13.099 KB	-rw-r--r--	2019-07-03 16:47	R E G D
cgitb.html	11.411 KB	-rw-r--r--	2019-07-03 16:47	R E G D
chunk.html	14.664 KB	-rw-r--r--	2019-07-03 16:47	R E G D
cmath.html	25.632 KB	-rw-r--r--	2019-07-03 16:47	R E G D
cmd.html	26.095 KB	-rw-r--r--	2019-07-03 16:47	R E G D
code.html	24.577 KB	-rw-r--r--	2019-07-03 16:47	R E G D
codecs.html	100.638 KB	-rw-r--r--	2019-07-03 16:47	R E G D
codeop.html	14.841 KB	-rw-r--r--	2019-07-03 16:47	R E G D
collections.html	133.964 KB	-rw-r--r--	2019-07-03 16:47	R E G D
colorpicker.html	7.523 KB	-rw-r--r--	2019-07-03 16:47	R E G D
colorsys.html	11.037 KB	-rw-r--r--	2019-07-03 16:47	R E G D
commands.html	14.361 KB	-rw-r--r--	2019-07-03 16:47	R E G D
compileall.html	16.827 KB	-rw-r--r--	2019-07-03 16:47	R E G D
compiler.html	67.75 KB	-rw-r--r--	2019-07-03 16:47	R E G D
configparser.html	62.131 KB	-rw-r--r--	2019-07-03 16:47	R E G D
constants.html	12.834 KB	-rw-r--r--	2019-07-03 16:47	R E G D
contextlib.html	19.388 KB	-rw-r--r--	2019-07-03 16:47	R E G D
cookie.html	39.068 KB	-rw-r--r--	2019-07-03 16:47	R E G D
cookielib.html	83.822 KB	-rw-r--r--	2019-07-03 16:47	R E G D
copy.html	12.189 KB	-rw-r--r--	2019-07-03 16:47	R E G D
copy_reg.html	13.765 KB	-rw-r--r--	2019-07-03 16:47	R E G D
crypt.html	10.041 KB	-rw-r--r--	2019-07-03 16:47	R E G D
crypto.html	7.591 KB	-rw-r--r--	2019-07-03 16:47	R E G D
csv.html	67.371 KB	-rw-r--r--	2019-07-03 16:47	R E G D
ctypes.html	238.781 KB	-rw-r--r--	2019-07-03 16:47	R E G D
curses.ascii.html	22.288 KB	-rw-r--r--	2019-07-03 16:47	R E G D
curses.html	146.633 KB	-rw-r--r--	2019-07-03 16:47	R E G D
curses.panel.html	14.388 KB	-rw-r--r--	2019-07-03 16:47	R E G D
custominterp.html	7.624 KB	-rw-r--r--	2019-07-03 16:47	R E G D
datatypes.html	16.845 KB	-rw-r--r--	2019-07-03 16:47	R E G D
datetime.html	226.595 KB	-rw-r--r--	2019-07-03 16:47	R E G D
dbhash.html	15.482 KB	-rw-r--r--	2019-07-03 16:47	R E G D
dbm.html	12.068 KB	-rw-r--r--	2019-07-03 16:47	R E G D
debug.html	10.151 KB	-rw-r--r--	2019-07-03 16:47	R E G D
decimal.html	194.439 KB	-rw-r--r--	2019-07-03 16:47	R E G D
development.html	14.168 KB	-rw-r--r--	2019-07-03 16:47	R E G D
difflib.html	84.829 KB	-rw-r--r--	2019-07-03 16:47	R E G D
dircache.html	11.407 KB	-rw-r--r--	2019-07-03 16:47	R E G D
dis.html	69.951 KB	-rw-r--r--	2019-07-03 16:47	R E G D
distutils.html	8.055 KB	-rw-r--r--	2019-07-03 16:47	R E G D
dl.html	16.327 KB	-rw-r--r--	2019-07-03 16:47	R E G D
doctest.html	165.542 KB	-rw-r--r--	2019-07-03 16:47	R E G D
docxmlrpcserver.html	16.432 KB	-rw-r--r--	2019-07-03 16:47	R E G D
dumbdbm.html	14.021 KB	-rw-r--r--	2019-07-03 16:47	R E G D
dummy_thread.html	9.432 KB	-rw-r--r--	2019-07-03 16:47	R E G D
dummy_threading.html	8.368 KB	-rw-r--r--	2019-07-03 16:47	R E G D
easydialogs.html	30.546 KB	-rw-r--r--	2019-07-03 16:47	R E G D
email-examples.html	45.654 KB	-rw-r--r--	2019-07-03 16:47	R E G D
email.charset.html	26.804 KB	-rw-r--r--	2019-07-03 16:47	R E G D
email.encoders.html	11.856 KB	-rw-r--r--	2019-07-03 16:47	R E G D
email.errors.html	15.767 KB	-rw-r--r--	2019-07-03 16:47	R E G D
email.generator.html	20.771 KB	-rw-r--r--	2019-07-03 16:47	R E G D
email.header.html	26.922 KB	-rw-r--r--	2019-07-03 16:47	R E G D
email.html	44.235 KB	-rw-r--r--	2019-07-03 16:47	R E G D
email.iterators.html	11.521 KB	-rw-r--r--	2019-07-03 16:47	R E G D
email.message.html	63.156 KB	-rw-r--r--	2019-07-03 16:47	R E G D
email.mime.html	27.928 KB	-rw-r--r--	2019-07-03 16:47	R E G D
email.parser.html	30.452 KB	-rw-r--r--	2019-07-03 16:47	R E G D
email.util.html	24.461 KB	-rw-r--r--	2019-07-03 16:47	R E G D
errno.html	37.994 KB	-rw-r--r--	2019-07-03 16:47	R E G D
exceptions.html	56.126 KB	-rw-r--r--	2019-07-03 16:47	R E G D
fcntl.html	22.673 KB	-rw-r--r--	2019-07-03 16:47	R E G D
filecmp.html	22.299 KB	-rw-r--r--	2019-07-03 16:47	R E G D
fileformats.html	9.136 KB	-rw-r--r--	2019-07-03 16:47	R E G D
fileinput.html	24.278 KB	-rw-r--r--	2019-07-03 16:47	R E G D
filesys.html	10.203 KB	-rw-r--r--	2019-07-03 16:47	R E G D
fl.html	49.923 KB	-rw-r--r--	2019-07-03 16:47	R E G D
fm.html	11.905 KB	-rw-r--r--	2019-07-03 16:47	R E G D
fnmatch.html	14.577 KB	-rw-r--r--	2019-07-03 16:47	R E G D
formatter.html	34.061 KB	-rw-r--r--	2019-07-03 16:47	R E G D
fpectl.html	16.008 KB	-rw-r--r--	2019-07-03 16:47	R E G D
fpformat.html	10.587 KB	-rw-r--r--	2019-07-03 16:47	R E G D
fractions.html	22.608 KB	-rw-r--r--	2019-07-03 16:47	R E G D
framework.html	33.345 KB	-rw-r--r--	2019-07-03 16:47	R E G D
frameworks.html	7.143 KB	-rw-r--r--	2019-07-03 16:47	R E G D
ftplib.html	43.989 KB	-rw-r--r--	2019-07-03 16:47	R E G D
functions.html	183.145 KB	-rw-r--r--	2019-07-03 16:47	R E G D
functools.html	27.169 KB	-rw-r--r--	2019-07-03 16:47	R E G D
future_builtins.html	13.04 KB	-rw-r--r--	2019-07-03 16:47	R E G D
gc.html	25.75 KB	-rw-r--r--	2019-07-03 16:47	R E G D
gdbm.html	15.965 KB	-rw-r--r--	2019-07-03 16:47	R E G D
gensuitemodule.html	11.513 KB	-rw-r--r--	2019-07-03 16:47	R E G D
getopt.html	23.662 KB	-rw-r--r--	2019-07-03 16:47	R E G D
getpass.html	10.652 KB	-rw-r--r--	2019-07-03 16:47	R E G D
gettext.html	78.757 KB	-rw-r--r--	2019-07-03 16:48	R E G D
gl.html	22.094 KB	-rw-r--r--	2019-07-03 16:48	R E G D
glob.html	13.26 KB	-rw-r--r--	2019-07-03 16:48	R E G D
grp.html	10.494 KB	-rw-r--r--	2019-07-03 16:48	R E G D
gzip.html	18.985 KB	-rw-r--r--	2019-07-03 16:48	R E G D
hashlib.html	18.198 KB	-rw-r--r--	2019-07-03 16:48	R E G D
heapq.html	31.61 KB	-rw-r--r--	2019-07-03 16:48	R E G D
hmac.html	10.464 KB	-rw-r--r--	2019-07-03 16:48	R E G D
hotshot.html	18.649 KB	-rw-r--r--	2019-07-03 16:48	R E G D
htmllib.html	25.315 KB	-rw-r--r--	2019-07-03 16:48	R E G D
htmlparser.html	39.114 KB	-rw-r--r--	2019-07-03 16:48	R E G D
httplib.html	62.95 KB	-rw-r--r--	2019-07-03 16:48	R E G D
i18n.html	9.523 KB	-rw-r--r--	2019-07-03 16:48	R E G D
ic.html	17.169 KB	-rw-r--r--	2019-07-03 16:48	R E G D
idle.html	20.896 KB	-rw-r--r--	2019-07-03 16:48	R E G D
imageop.html	14.765 KB	-rw-r--r--	2019-07-03 16:48	R E G D
imaplib.html	51.986 KB	-rw-r--r--	2019-07-03 16:48	R E G D
imgfile.html	11.712 KB	-rw-r--r--	2019-07-03 16:48	R E G D
imghdr.html	11.297 KB	-rw-r--r--	2019-07-03 16:48	R E G D
imp.html	34.344 KB	-rw-r--r--	2019-07-03 16:48	R E G D
importlib.html	8.258 KB	-rw-r--r--	2019-07-03 16:48	R E G D
imputil.html	31.808 KB	-rw-r--r--	2019-07-03 16:48	R E G D
index.html	72.778 KB	-rw-r--r--	2019-07-03 16:48	R E G D
inspect.html	50.705 KB	-rw-r--r--	2019-07-03 16:48	R E G D
internet.html	24.872 KB	-rw-r--r--	2019-07-03 16:48	R E G D
intro.html	8.935 KB	-rw-r--r--	2019-07-03 16:48	R E G D
io.html	98.13 KB	-rw-r--r--	2019-07-03 16:48	R E G D
ipc.html	13.405 KB	-rw-r--r--	2019-07-03 16:48	R E G D
itertools.html	115.905 KB	-rw-r--r--	2019-07-03 16:48	R E G D
jpeg.html	12.743 KB	-rw-r--r--	2019-07-03 16:48	R E G D
json.html	67.037 KB	-rw-r--r--	2019-07-03 16:48	R E G D
keyword.html	7.677 KB	-rw-r--r--	2019-07-03 16:48	R E G D
language.html	11.027 KB	-rw-r--r--	2019-07-03 16:48	R E G D
linecache.html	10.591 KB	-rw-r--r--	2019-07-03 16:48	R E G D
locale.html	55.137 KB	-rw-r--r--	2019-07-03 16:48	R E G D
logging.config.html	63.355 KB	-rw-r--r--	2019-07-03 16:48	R E G D
logging.handlers.html	69.645 KB	-rw-r--r--	2019-07-03 16:48	R E G D
logging.html	95.645 KB	-rw-r--r--	2019-07-03 16:48	R E G D
mac.html	21.787 KB	-rw-r--r--	2019-07-03 16:48	R E G D
macos.html	14.758 KB	-rw-r--r--	2019-07-03 16:48	R E G D
macosa.html	12.959 KB	-rw-r--r--	2019-07-03 16:48	R E G D
macostools.html	15.516 KB	-rw-r--r--	2019-07-03 16:48	R E G D
macpath.html	7.764 KB	-rw-r--r--	2019-07-03 16:48	R E G D
mailbox.html	156.753 KB	-rw-r--r--	2019-07-03 16:48	R E G D
mailcap.html	13.215 KB	-rw-r--r--	2019-07-03 16:48	R E G D
markup.html	18.772 KB	-rw-r--r--	2019-07-03 16:48	R E G D
marshal.html	17.977 KB	-rw-r--r--	2019-07-03 16:48	R E G D
math.html	39.242 KB	-rw-r--r--	2019-07-03 16:48	R E G D
md5.html	13.968 KB	-rw-r--r--	2019-07-03 16:48	R E G D
mhlib.html	21.537 KB	-rw-r--r--	2019-07-03 16:48	R E G D
mimetools.html	19.251 KB	-rw-r--r--	2019-07-03 16:48	R E G D
mimetypes.html	28.39 KB	-rw-r--r--	2019-07-03 16:48	R E G D
mimewriter.html	15.016 KB	-rw-r--r--	2019-07-03 16:48	R E G D
mimify.html	13.361 KB	-rw-r--r--	2019-07-03 16:48	R E G D
miniaeframe.html	12.199 KB	-rw-r--r--	2019-07-03 16:48	R E G D
misc.html	6.868 KB	-rw-r--r--	2019-07-03 16:48	R E G D
mm.html	9.032 KB	-rw-r--r--	2019-07-03 16:48	R E G D
mmap.html	28.364 KB	-rw-r--r--	2019-07-03 16:48	R E G D
modulefinder.html	15.313 KB	-rw-r--r--	2019-07-03 16:48	R E G D
modules.html	8.456 KB	-rw-r--r--	2019-07-03 16:48	R E G D
msilib.html	52.431 KB	-rw-r--r--	2019-07-03 16:48	R E G D
msvcrt.html	19.372 KB	-rw-r--r--	2019-07-03 16:48	R E G D
multifile.html	24.297 KB	-rw-r--r--	2019-07-03 16:48	R E G D
multiprocessing.html	365.706 KB	-rw-r--r--	2019-07-03 16:48	R E G D
mutex.html	11.231 KB	-rw-r--r--	2019-07-03 16:48	R E G D
netdata.html	16.983 KB	-rw-r--r--	2019-07-03 16:48	R E G D
netrc.html	12.305 KB	-rw-r--r--	2019-07-03 16:48	R E G D
new.html	12.122 KB	-rw-r--r--	2019-07-03 16:48	R E G D
nis.html	10.636 KB	-rw-r--r--	2019-07-03 16:48	R E G D
nntplib.html	41.919 KB	-rw-r--r--	2019-07-03 16:48	R E G D
numbers.html	37.748 KB	-rw-r--r--	2019-07-03 16:48	R E G D
numeric.html	13.553 KB	-rw-r--r--	2019-07-03 16:48	R E G D
operator.html	82 KB	-rw-r--r--	2019-07-03 16:48	R E G D
optparse.html	222.556 KB	-rw-r--r--	2019-07-03 16:48	R E G D
os.html	214.245 KB	-rw-r--r--	2019-07-03 16:48	R E G D
os.path.html	38.341 KB	-rw-r--r--	2019-07-03 16:48	R E G D
ossaudiodev.html	41.503 KB	-rw-r--r--	2019-07-03 16:48	R E G D
othergui.html	9.084 KB	-rw-r--r--	2019-07-03 16:48	R E G D
parser.html	39.363 KB	-rw-r--r--	2019-07-03 16:48	R E G D
pdb.html	33.961 KB	-rw-r--r--	2019-07-03 16:48	R E G D
persistence.html	14.865 KB	-rw-r--r--	2019-07-03 16:48	R E G D
pickle.html	102.271 KB	-rw-r--r--	2019-07-03 16:48	R E G D
pickletools.html	10.631 KB	-rw-r--r--	2019-07-03 16:48	R E G D
pipes.html	18.01 KB	-rw-r--r--	2019-07-03 16:48	R E G D
pkgutil.html	25.107 KB	-rw-r--r--	2019-07-03 16:48	R E G D
platform.html	28.367 KB	-rw-r--r--	2019-07-03 16:48	R E G D
plistlib.html	17.028 KB	-rw-r--r--	2019-07-03 16:48	R E G D
popen2.html	25.431 KB	-rw-r--r--	2019-07-03 16:48	R E G D
poplib.html	22.321 KB	-rw-r--r--	2019-07-03 16:48	R E G D
posix.html	14.413 KB	-rw-r--r--	2019-07-03 16:48	R E G D
posixfile.html	19.763 KB	-rw-r--r--	2019-07-03 16:48	R E G D
pprint.html	29.922 KB	-rw-r--r--	2019-07-03 16:48	R E G D
profile.html	63.556 KB	-rw-r--r--	2019-07-03 16:48	R E G D
pty.html	9.478 KB	-rw-r--r--	2019-07-03 16:48	R E G D
pwd.html	11.428 KB	-rw-r--r--	2019-07-03 16:48	R E G D
py_compile.html	11.116 KB	-rw-r--r--	2019-07-03 16:48	R E G D
pyclbr.html	14.707 KB	-rw-r--r--	2019-07-03 16:48	R E G D
pydoc.html	11.484 KB	-rw-r--r--	2019-07-03 16:48	R E G D
pyexpat.html	71.528 KB	-rw-r--r--	2019-07-03 16:48	R E G D
python.html	12.274 KB	-rw-r--r--	2019-07-03 16:48	R E G D
queue.html	24.22 KB	-rw-r--r--	2019-07-03 16:48	R E G D
quopri.html	11.896 KB	-rw-r--r--	2019-07-03 16:48	R E G D
random.html	37.835 KB	-rw-r--r--	2019-07-03 16:48	R E G D
re.html	134.742 KB	-rw-r--r--	2019-07-03 16:48	R E G D
readline.html	28.24 KB	-rw-r--r--	2019-07-03 16:48	R E G D
repr.html	20.427 KB	-rw-r--r--	2019-07-03 16:48	R E G D
resource.html	26.483 KB	-rw-r--r--	2019-07-03 16:48	R E G D
restricted.html	11.647 KB	-rw-r--r--	2019-07-03 16:48	R E G D
rexec.html	37.41 KB	-rw-r--r--	2019-07-03 16:48	R E G D
rfc822.html	42.22 KB	-rw-r--r--	2019-07-03 16:48	R E G D
rlcompleter.html	13.506 KB	-rw-r--r--	2019-07-03 16:48	R E G D
robotparser.html	12.268 KB	-rw-r--r--	2019-07-03 16:48	R E G D
runpy.html	19.339 KB	-rw-r--r--	2019-07-03 16:48	R E G D
sched.html	18.543 KB	-rw-r--r--	2019-07-03 16:48	R E G D
scrolledtext.html	9.315 KB	-rw-r--r--	2019-07-03 16:48	R E G D
select.html	39.672 KB	-rw-r--r--	2019-07-03 16:48	R E G D
sets.html	36.918 KB	-rw-r--r--	2019-07-03 16:48	R E G D
sgi.html	9.712 KB	-rw-r--r--	2019-07-03 16:48	R E G D
sgmllib.html	30.771 KB	-rw-r--r--	2019-07-03 16:48	R E G D
sha.html	12.088 KB	-rw-r--r--	2019-07-03 16:48	R E G D
shelve.html	27.021 KB	-rw-r--r--	2019-07-03 16:48	R E G D
shlex.html	32.102 KB	-rw-r--r--	2019-07-03 16:48	R E G D
shutil.html	40.218 KB	-rw-r--r--	2019-07-03 16:48	R E G D
signal.html	31.136 KB	-rw-r--r--	2019-07-03 16:48	R E G D
simplehttpserver.html	18.41 KB	-rw-r--r--	2019-07-03 16:48	R E G D
simplexmlrpcserver.html	31.388 KB	-rw-r--r--	2019-07-03 16:48	R E G D
site.html	23.637 KB	-rw-r--r--	2019-07-03 16:48	R E G D
smtpd.html	12.465 KB	-rw-r--r--	2019-07-03 16:48	R E G D
smtplib.html	42.127 KB	-rw-r--r--	2019-07-03 16:48	R E G D
sndhdr.html	10.018 KB	-rw-r--r--	2019-07-03 16:48	R E G D
socket.html	106.338 KB	-rw-r--r--	2019-07-03 16:48	R E G D
socketserver.html	59.829 KB	-rw-r--r--	2019-07-03 16:48	R E G D
someos.html	15.106 KB	-rw-r--r--	2019-07-03 16:48	R E G D
spwd.html	10.328 KB	-rw-r--r--	2019-07-03 16:48	R E G D
sqlite3.html	139.502 KB	-rw-r--r--	2019-07-03 16:48	R E G D
ssl.html	65.622 KB	-rw-r--r--	2019-07-03 16:48	R E G D
stat.html	32.31 KB	-rw-r--r--	2019-07-03 16:48	R E G D
statvfs.html	10.604 KB	-rw-r--r--	2019-07-03 16:48	R E G D
stdtypes.html	260.401 KB	-rw-r--r--	2019-07-03 16:48	R E G D
string.html	106.649 KB	-rw-r--r--	2019-07-03 16:48	R E G D
stringio.html	18.813 KB	-rw-r--r--	2019-07-03 16:48	R E G D
stringprep.html	16.13 KB	-rw-r--r--	2019-07-03 16:48	R E G D
strings.html	14.927 KB	-rw-r--r--	2019-07-03 16:48	R E G D
struct.html	40.878 KB	-rw-r--r--	2019-07-03 16:48	R E G D
subprocess.html	84.912 KB	-rw-r--r--	2019-07-03 16:48	R E G D
sun.html	6.843 KB	-rw-r--r--	2019-07-03 16:48	R E G D
sunau.html	27.104 KB	-rw-r--r--	2019-07-03 16:48	R E G D
sunaudio.html	17.795 KB	-rw-r--r--	2019-07-03 16:48	R E G D
symbol.html	7.66 KB	-rw-r--r--	2019-07-03 16:48	R E G D
symtable.html	22.937 KB	-rw-r--r--	2019-07-03 16:48	R E G D
sys.html	98.698 KB	-rw-r--r--	2019-07-03 16:48	R E G D
sysconfig.html	23.844 KB	-rw-r--r--	2019-07-03 16:48	R E G D
syslog.html	17.919 KB	-rw-r--r--	2019-07-03 16:48	R E G D
tabnanny.html	10.631 KB	-rw-r--r--	2019-07-03 16:48	R E G D
tarfile.html	78.683 KB	-rw-r--r--	2019-07-03 16:48	R E G D
telnetlib.html	25.479 KB	-rw-r--r--	2019-07-03 16:48	R E G D
tempfile.html	29.416 KB	-rw-r--r--	2019-07-03 16:48	R E G D
termios.html	16.011 KB	-rw-r--r--	2019-07-03 16:48	R E G D
test.html	52.621 KB	-rw-r--r--	2019-07-03 16:48	R E G D
textwrap.html	27.253 KB	-rw-r--r--	2019-07-03 16:48	R E G D
thread.html	20.468 KB	-rw-r--r--	2019-07-03 16:48	R E G D
threading.html	76.69 KB	-rw-r--r--	2019-07-03 16:48	R E G D
time.html	56.927 KB	-rw-r--r--	2019-07-03 16:48	R E G D
timeit.html	36.267 KB	-rw-r--r--	2019-07-03 16:48	R E G D
tix.html	46.959 KB	-rw-r--r--	2019-07-03 16:48	R E G D
tk.html	23.644 KB	-rw-r--r--	2019-07-03 16:48	R E G D
tkinter.html	67.666 KB	-rw-r--r--	2019-07-03 16:48	R E G D
token.html	19.617 KB	-rw-r--r--	2019-07-03 16:48	R E G D
tokenize.html	18.445 KB	-rw-r--r--	2019-07-03 16:48	R E G D
trace.html	25.535 KB	-rw-r--r--	2019-07-03 16:48	R E G D
traceback.html	33.438 KB	-rw-r--r--	2019-07-03 16:48	R E G D
ttk.html	101.749 KB	-rw-r--r--	2019-07-03 16:48	R E G D
tty.html	9.058 KB	-rw-r--r--	2019-07-03 16:48	R E G D
turtle.html	211.742 KB	-rw-r--r--	2019-07-03 16:48	R E G D
types.html	27.591 KB	-rw-r--r--	2019-07-03 16:48	R E G D
undoc.html	23.156 KB	-rw-r--r--	2019-07-03 16:48	R E G D
unicodedata.html	18.546 KB	-rw-r--r--	2019-07-03 16:48	R E G D
unittest.html	202.848 KB	-rw-r--r--	2019-07-03 16:48	R E G D
unix.html	10.551 KB	-rw-r--r--	2019-07-03 16:48	R E G D
urllib.html	58.682 KB	-rw-r--r--	2019-07-03 16:48	R E G D
urllib2.html	100.578 KB	-rw-r--r--	2019-07-03 16:48	R E G D
urlparse.html	40.414 KB	-rw-r--r--	2019-07-03 16:48	R E G D
user.html	11.826 KB	-rw-r--r--	2019-07-03 16:48	R E G D
userdict.html	29.729 KB	-rw-r--r--	2019-07-03 16:48	R E G D
uu.html	11.026 KB	-rw-r--r--	2019-07-03 16:48	R E G D
uuid.html	28.191 KB	-rw-r--r--	2019-07-03 16:48	R E G D
warnings.html	46.599 KB	-rw-r--r--	2019-07-03 16:48	R E G D
wave.html	22.216 KB	-rw-r--r--	2019-07-03 16:48	R E G D
weakref.html	36.521 KB	-rw-r--r--	2019-07-03 16:48	R E G D
webbrowser.html	23.065 KB	-rw-r--r--	2019-07-03 16:48	R E G D
whichdb.html	8.853 KB	-rw-r--r--	2019-07-03 16:48	R E G D
windows.html	9.335 KB	-rw-r--r--	2019-07-03 16:48	R E G D
winsound.html	18.747 KB	-rw-r--r--	2019-07-03 16:48	R E G D
wsgiref.html	81.043 KB	-rw-r--r--	2019-07-03 16:48	R E G D
xdrlib.html	29.94 KB	-rw-r--r--	2019-07-03 16:48	R E G D
xml.dom.html	89.044 KB	-rw-r--r--	2019-07-03 16:48	R E G D
xml.dom.minidom.html	40.42 KB	-rw-r--r--	2019-07-03 16:48	R E G D
xml.dom.pulldom.html	12.705 KB	-rw-r--r--	2019-07-03 16:48	R E G D
xml.etree.elementtree.html	93.219 KB	-rw-r--r--	2019-07-03 16:48	R E G D
xml.html	16.493 KB	-rw-r--r--	2019-07-03 16:48	R E G D
xml.sax.handler.html	38.632 KB	-rw-r--r--	2019-07-03 16:48	R E G D
xml.sax.html	20.221 KB	-rw-r--r--	2019-07-03 16:48	R E G D
xml.sax.reader.html	39.086 KB	-rw-r--r--	2019-07-03 16:48	R E G D
xml.sax.utils.html	14.257 KB	-rw-r--r--	2019-07-03 16:48	R E G D
xmlrpclib.html	60.79 KB	-rw-r--r--	2019-07-03 16:48	R E G D
zipfile.html	53.136 KB	-rw-r--r--	2019-07-03 16:48	R E G D
zipimport.html	20.425 KB	-rw-r--r--	2019-07-03 16:48	R E G D
zlib.html	25.461 KB	-rw-r--r--	2019-07-03 16:48	R E G D
REQUEST EXIT

Navigation

9.4. decimal — Decimal fixed point and floating point arithmetic¶

9.4.1. Quick-start Tutorial¶

9.4.2. Decimal objects¶

9.4.2.1. Logical operands¶

9.4.3. Context objects¶

9.4.4. Signals¶

9.4.5. Floating Point Notes¶

9.4.5.1. Mitigating round-off error with increased precision¶

9.4.5.2. Special values¶

9.4.6. Working with threads¶

9.4.7. Recipes¶

9.4.8. Decimal FAQ¶

Table Of Contents

Previous topic

Next topic

This Page

Quick search

Navigation

9.4. `decimal` — Decimal fixed point and floating point arithmetic¶