Initialization, Finalization, and Threads¶

Initializing and finalizing the interpreter¶

void Py_Initialize()¶: Initialize the Python interpreter. In an application embedding Python, this should be called before using any other Python/C API functions; with the exception of Py_SetProgramName(), Py_SetPythonHome(), PyEval_InitThreads(), PyEval_ReleaseLock(), and PyEval_AcquireLock(). This initializes the table of loaded modules (sys.modules), and creates the fundamental modules __builtin__, __main__ and sys. It also initializes the module search path (sys.path). It does not set sys.argv; use PySys_SetArgvEx() for that. This is a no-op when called for a second time (without calling Py_Finalize() first). There is no return value; it is a fatal error if the initialization fails.

void Py_InitializeEx(int initsigs)¶

This function works like Py_Initialize() if initsigs is 1. If initsigs is 0, it skips initialization registration of signal handlers, which might be useful when Python is embedded.

New in version 2.4.

int Py_IsInitialized()¶: Return true (nonzero) when the Python interpreter has been initialized, false (zero) if not. After Py_Finalize() is called, this returns false until Py_Initialize() is called again.

void Py_Finalize()¶

Undo all initializations made by Py_Initialize() and subsequent use of Python/C API functions, and destroy all sub-interpreters (see Py_NewInterpreter() below) that were created and not yet destroyed since the last call to Py_Initialize(). Ideally, this frees all memory allocated by the Python interpreter. This is a no-op when called for a second time (without calling Py_Initialize() again first). There is no return value; errors during finalization are ignored.

This function is provided for a number of reasons. An embedding application might want to restart Python without having to restart the application itself. An application that has loaded the Python interpreter from a dynamically loadable library (or DLL) might want to free all memory allocated by Python before unloading the DLL. During a hunt for memory leaks in an application a developer might want to free all memory allocated by Python before exiting from the application.

Bugs and caveats: The destruction of modules and objects in modules is done in random order; this may cause destructors (__del__() methods) to fail when they depend on other objects (even functions) or modules. Dynamically loaded extension modules loaded by Python are not unloaded. Small amounts of memory allocated by the Python interpreter may not be freed (if you find a leak, please report it). Memory tied up in circular references between objects is not freed. Some memory allocated by extension modules may not be freed. Some extensions may not work properly if their initialization routine is called more than once; this can happen if an application calls Py_Initialize() and Py_Finalize() more than once.

Process-wide parameters¶

void Py_SetProgramName(char *name)¶: This function should be called before Py_Initialize() is called for the first time, if it is called at all. It tells the interpreter the value of the argv[0] argument to the main() function of the program. This is used by Py_GetPath() and some other functions below to find the Python run-time libraries relative to the interpreter executable. The default value is 'python'. The argument should point to a zero-terminated character string in static storage whose contents will not change for the duration of the program’s execution. No code in the Python interpreter will change the contents of this storage.

char* Py_GetProgramName()¶: Return the program name set with Py_SetProgramName(), or the default. The returned string points into static storage; the caller should not modify its value.

char* Py_GetPrefix()¶: Return the prefix for installed platform-independent files. This is derived through a number of complicated rules from the program name set with Py_SetProgramName() and some environment variables; for example, if the program name is '/usr/local/bin/python', the prefix is '/usr/local'. The returned string points into static storage; the caller should not modify its value. This corresponds to the prefix variable in the top-level Makefile and the --prefix argument to the configure script at build time. The value is available to Python code as sys.prefix. It is only useful on Unix. See also the next function.

char* Py_GetExecPrefix()¶

Return the exec-prefix for installed platform-dependent files. This is derived through a number of complicated rules from the program name set with Py_SetProgramName() and some environment variables; for example, if the program name is '/usr/local/bin/python', the exec-prefix is '/usr/local'. The returned string points into static storage; the caller should not modify its value. This corresponds to the exec_prefix variable in the top-level Makefile and the --exec-prefix argument to the configure script at build time. The value is available to Python code as sys.exec_prefix. It is only useful on Unix.

Background: The exec-prefix differs from the prefix when platform dependent files (such as executables and shared libraries) are installed in a different directory tree. In a typical installation, platform dependent files may be installed in the /usr/local/plat subtree while platform independent may be installed in /usr/local.

Generally speaking, a platform is a combination of hardware and software families, e.g. Sparc machines running the Solaris 2.x operating system are considered the same platform, but Intel machines running Solaris 2.x are another platform, and Intel machines running Linux are yet another platform. Different major revisions of the same operating system generally also form different platforms. Non-Unix operating systems are a different story; the installation strategies on those systems are so different that the prefix and exec-prefix are meaningless, and set to the empty string. Note that compiled Python bytecode files are platform independent (but not independent from the Python version by which they were compiled!).

System administrators will know how to configure the mount or automount programs to share /usr/local between platforms while having /usr/local/plat be a different filesystem for each platform.

char* Py_GetProgramFullPath()¶: Return the full program name of the Python executable; this is computed as a side-effect of deriving the default module search path from the program name (set by Py_SetProgramName() above). The returned string points into static storage; the caller should not modify its value. The value is available to Python code as sys.executable.

char* Py_GetPath()¶: Return the default module search path; this is computed from the program name (set by Py_SetProgramName() above) and some environment variables. The returned string consists of a series of directory names separated by a platform dependent delimiter character. The delimiter character is ':' on Unix and Mac OS X, ';' on Windows. The returned string points into static storage; the caller should not modify its value. The list sys.path is initialized with this value on interpreter startup; it can be (and usually is) modified later to change the search path for loading modules.

const char* Py_GetVersion()¶

Return the version of this Python interpreter. This is a string that looks something like

"1.5 (#67, Dec 31 1997, 22:34:28) [GCC 2.7.2.2]"

The first word (up to the first space character) is the current Python version; the first three characters are the major and minor version separated by a period. The returned string points into static storage; the caller should not modify its value. The value is available to Python code as sys.version.

const char* Py_GetPlatform()¶: Return the platform identifier for the current platform. On Unix, this is formed from the “official” name of the operating system, converted to lower case, followed by the major revision number; e.g., for Solaris 2.x, which is also known as SunOS 5.x, the value is 'sunos5'. On Mac OS X, it is 'darwin'. On Windows, it is 'win'. The returned string points into static storage; the caller should not modify its value. The value is available to Python code as sys.platform.

const char* Py_GetCopyright()¶

Return the official copyright string for the current Python version, for example

The returned string points into static storage; the caller should not modify its value. The value is available to Python code as sys.copyright.

const char* Py_GetCompiler()¶

Return an indication of the compiler used to build the current Python version, in square brackets, for example:

"[GCC 2.7.2.2]"

The returned string points into static storage; the caller should not modify its value. The value is available to Python code as part of the variable sys.version.

const char* Py_GetBuildInfo()¶

Return information about the sequence number and build date and time of the current Python interpreter instance, for example

"#67, Aug  1 1997, 22:34:28"

The returned string points into static storage; the caller should not modify its value. The value is available to Python code as part of the variable sys.version.

void PySys_SetArgvEx(int argc, char **argv, int updatepath)¶

Set sys.argv based on argc and argv. These parameters are similar to those passed to the program’s main() function with the difference that the first entry should refer to the script file to be executed rather than the executable hosting the Python interpreter. If there isn’t a script that will be run, the first entry in argv can be an empty string. If this function fails to initialize sys.argv, a fatal condition is signalled using Py_FatalError().

If updatepath is zero, this is all the function does. If updatepath is non-zero, the function also modifies sys.path according to the following algorithm:

If the name of an existing script is passed in argv[0], the absolute path of the directory where the script is located is prepended to sys.path.
Otherwise (that is, if argc is 0 or argv[0] doesn’t point to an existing file name), an empty string is prepended to sys.path, which is the same as prepending the current working directory (".").

Note

It is recommended that applications embedding the Python interpreter for purposes other than executing a single script pass 0 as updatepath, and update sys.path themselves if desired. See CVE-2008-5983.

On versions before 2.6.6, you can achieve the same effect by manually popping the first sys.path element after having called PySys_SetArgv(), for example using:

PyRun_SimpleString("import sys; sys.path.pop(0)\n");

New in version 2.6.6.

void PySys_SetArgv(int argc, char **argv)¶: This function works like PySys_SetArgvEx() with updatepath set to 1.

void Py_SetPythonHome(char *home)¶

Set the default “home” directory, that is, the location of the standard Python libraries. See PYTHONHOME for the meaning of the argument string.

The argument should point to a zero-terminated character string in static storage whose contents will not change for the duration of the program’s execution. No code in the Python interpreter will change the contents of this storage.

char* Py_GetPythonHome()¶: Return the default “home”, that is, the value set by a previous call to Py_SetPythonHome(), or the value of the PYTHONHOME environment variable if it is set.

Thread State and the Global Interpreter Lock¶

The Python interpreter is not fully thread-safe. In order to support multi-threaded Python programs, there’s a global lock, called the global interpreter lock or GIL, that must be held by the current thread before it can safely access Python objects. Without the lock, even the simplest operations could cause problems in a multi-threaded program: for example, when two threads simultaneously increment the reference count of the same object, the reference count could end up being incremented only once instead of twice.

Therefore, the rule exists that only the thread that has acquired the GIL may operate on Python objects or call Python/C API functions. In order to emulate concurrency of execution, the interpreter regularly tries to switch threads (see sys.setcheckinterval()). The lock is also released around potentially blocking I/O operations like reading or writing a file, so that other Python threads can run in the meantime.

The Python interpreter keeps some thread-specific bookkeeping information inside a data structure called PyThreadState. There’s also one global variable pointing to the current PyThreadState: it can be retrieved using PyThreadState_Get().

Releasing the GIL from extension code¶

Most extension code manipulating the GIL has the following simple structure:

Save the thread state in a local variable.
Release the global interpreter lock.
... Do some blocking I/O operation ...
Reacquire the global interpreter lock.
Restore the thread state from the local variable.

This is so common that a pair of macros exists to simplify it:

Py_BEGIN_ALLOW_THREADS
... Do some blocking I/O operation ...
Py_END_ALLOW_THREADS

The Py_BEGIN_ALLOW_THREADS macro opens a new block and declares a hidden local variable; the Py_END_ALLOW_THREADS macro closes the block. These two macros are still available when Python is compiled without thread support (they simply have an empty expansion).

When thread support is enabled, the block above expands to the following code:

PyThreadState *_save;

_save = PyEval_SaveThread();
...Do some blocking I/O operation...
PyEval_RestoreThread(_save);

Here is how these functions work: the global interpreter lock is used to protect the pointer to the current thread state. When releasing the lock and saving the thread state, the current thread state pointer must be retrieved before the lock is released (since another thread could immediately acquire the lock and store its own thread state in the global variable). Conversely, when acquiring the lock and restoring the thread state, the lock must be acquired before storing the thread state pointer.

Note

Calling system I/O functions is the most common use case for releasing the GIL, but it can also be useful before calling long-running computations which don’t need access to Python objects, such as compression or cryptographic functions operating over memory buffers. For example, the standard zlib and hashlib modules release the GIL when compressing or hashing data.

Non-Python created threads¶

When threads are created using the dedicated Python APIs (such as the threading module), a thread state is automatically associated to them and the code showed above is therefore correct. However, when threads are created from C (for example by a third-party library with its own thread management), they don’t hold the GIL, nor is there a thread state structure for them.

If you need to call Python code from these threads (often this will be part of a callback API provided by the aforementioned third-party library), you must first register these threads with the interpreter by creating a thread state data structure, then acquiring the GIL, and finally storing their thread state pointer, before you can start using the Python/C API. When you are done, you should reset the thread state pointer, release the GIL, and finally free the thread state data structure.

The PyGILState_Ensure() and PyGILState_Release() functions do all of the above automatically. The typical idiom for calling into Python from a C thread is:

PyGILState_STATE gstate;
gstate = PyGILState_Ensure();

/* Perform Python actions here. */
result = CallSomeFunction();
/* evaluate result or handle exception */

/* Release the thread. No Python API allowed beyond this point. */
PyGILState_Release(gstate);

Note that the PyGILState_*() functions assume there is only one global interpreter (created automatically by Py_Initialize()). Python supports the creation of additional interpreters (using Py_NewInterpreter()), but mixing multiple interpreters and the PyGILState_*() API is unsupported.

Another important thing to note about threads is their behaviour in the face of the C fork() call. On most systems with fork(), after a process forks only the thread that issued the fork will exist. That also means any locks held by other threads will never be released. Python solves this for os.fork() by acquiring the locks it uses internally before the fork, and releasing them afterwards. In addition, it resets any Lock Objects in the child. When extending or embedding Python, there is no way to inform Python of additional (non-Python) locks that need to be acquired before or reset after a fork. OS facilities such as pthread_atfork() would need to be used to accomplish the same thing. Additionally, when extending or embedding Python, calling fork() directly rather than through os.fork() (and returning to or calling into Python) may result in a deadlock by one of Python’s internal locks being held by a thread that is defunct after the fork. PyOS_AfterFork() tries to reset the necessary locks, but is not always able to.

High-level API¶

These are the most commonly used types and functions when writing C extension code, or when embedding the Python interpreter:

PyInterpreterState¶

This data structure represents the state shared by a number of cooperating threads. Threads belonging to the same interpreter share their module administration and a few other internal items. There are no public members in this structure.

Threads belonging to different interpreters initially share nothing, except process state like available memory, open file descriptors and such. The global interpreter lock is also shared by all threads, regardless of to which interpreter they belong.

PyThreadState¶: This data structure represents the state of a single thread. The only public data member is PyInterpreterState *interp, which points to this thread’s interpreter state.

void PyEval_InitThreads()¶

Initialize and acquire the global interpreter lock. It should be called in the main thread before creating a second thread or engaging in any other thread operations such as PyEval_ReleaseLock() or PyEval_ReleaseThread(tstate). It is not needed before calling PyEval_SaveThread() or PyEval_RestoreThread().

This is a no-op when called for a second time. It is safe to call this function before calling Py_Initialize().

Note

When only the main thread exists, no GIL operations are needed. This is a common situation (most Python programs do not use threads), and the lock operations slow the interpreter down a bit. Therefore, the lock is not created initially. This situation is equivalent to having acquired the lock: when there is only a single thread, all object accesses are safe. Therefore, when this function initializes the global interpreter lock, it also acquires it. Before the Python _thread module creates a new thread, knowing that either it has the lock or the lock hasn’t been created yet, it calls PyEval_InitThreads(). When this call returns, it is guaranteed that the lock has been created and that the calling thread has acquired it.

It is not safe to call this function when it is unknown which thread (if any) currently has the global interpreter lock.

This function is not available when thread support is disabled at compile time.

int PyEval_ThreadsInitialized()¶

Returns a non-zero value if PyEval_InitThreads() has been called. This function can be called without holding the GIL, and therefore can be used to avoid calls to the locking API when running single-threaded. This function is not available when thread support is disabled at compile time.

New in version 2.4.

PyThreadState* PyEval_SaveThread()¶: Release the global interpreter lock (if it has been created and thread support is enabled) and reset the thread state to NULL, returning the previous thread state (which is not NULL). If the lock has been created, the current thread must have acquired it. (This function is available even when thread support is disabled at compile time.)

void PyEval_RestoreThread(PyThreadState *tstate)¶: Acquire the global interpreter lock (if it has been created and thread support is enabled) and set the thread state to tstate, which must not be NULL. If the lock has been created, the current thread must not have acquired it, otherwise deadlock ensues. (This function is available even when thread support is disabled at compile time.)

PyThreadState* PyThreadState_Get()¶: Return the current thread state. The global interpreter lock must be held. When the current thread state is NULL, this issues a fatal error (so that the caller needn’t check for NULL).

PyThreadState* PyThreadState_Swap(PyThreadState *tstate)¶: Swap the current thread state with the thread state given by the argument tstate, which may be NULL. The global interpreter lock must be held and is not released.

void PyEval_ReInitThreads()¶: This function is called from PyOS_AfterFork() to ensure that newly created child processes don’t hold locks referring to threads which are not running in the child process.

The following functions use thread-local storage, and are not compatible with sub-interpreters:

PyGILState_STATE PyGILState_Ensure()¶

Ensure that the current thread is ready to call the Python C API regardless of the current state of Python, or of the global interpreter lock. This may be called as many times as desired by a thread as long as each call is matched with a call to PyGILState_Release(). In general, other thread-related APIs may be used between PyGILState_Ensure() and PyGILState_Release() calls as long as the thread state is restored to its previous state before the Release(). For example, normal usage of the Py_BEGIN_ALLOW_THREADS and Py_END_ALLOW_THREADS macros is acceptable.

The return value is an opaque “handle” to the thread state when PyGILState_Ensure() was called, and must be passed to PyGILState_Release() to ensure Python is left in the same state. Even though recursive calls are allowed, these handles cannot be shared - each unique call to PyGILState_Ensure() must save the handle for its call to PyGILState_Release().

When the function returns, the current thread will hold the GIL and be able to call arbitrary Python code. Failure is a fatal error.

New in version 2.3.

void PyGILState_Release(PyGILState_STATE)¶

Release any resources previously acquired. After this call, Python’s state will be the same as it was prior to the corresponding PyGILState_Ensure() call (but generally this state will be unknown to the caller, hence the use of the GILState API).

Every call to PyGILState_Ensure() must be matched by a call to PyGILState_Release() on the same thread.

New in version 2.3.

PyThreadState PyGILState_GetThisThreadState()¶

Get the current thread state for this thread. May return NULL if no GILState API has been used on the current thread. Note that the main thread always has such a thread-state, even if no auto-thread-state call has been made on the main thread. This is mainly a helper/diagnostic function.

New in version 2.3.

The following macros are normally used without a trailing semicolon; look for example usage in the Python source distribution.

Py_BEGIN_ALLOW_THREADS¶: This macro expands to { PyThreadState *_save; _save = PyEval_SaveThread();. Note that it contains an opening brace; it must be matched with a following Py_END_ALLOW_THREADS macro. See above for further discussion of this macro. It is a no-op when thread support is disabled at compile time.

Py_END_ALLOW_THREADS¶: This macro expands to PyEval_RestoreThread(_save); }. Note that it contains a closing brace; it must be matched with an earlier Py_BEGIN_ALLOW_THREADS macro. See above for further discussion of this macro. It is a no-op when thread support is disabled at compile time.

Py_BLOCK_THREADS¶: This macro expands to PyEval_RestoreThread(_save);: it is equivalent to Py_END_ALLOW_THREADS without the closing brace. It is a no-op when thread support is disabled at compile time.

Py_UNBLOCK_THREADS¶: This macro expands to _save = PyEval_SaveThread();: it is equivalent to Py_BEGIN_ALLOW_THREADS without the opening brace and variable declaration. It is a no-op when thread support is disabled at compile time.

Low-level API¶

All of the following functions are only available when thread support is enabled at compile time, and must be called only when the global interpreter lock has been created.

PyInterpreterState* PyInterpreterState_New()¶: Create a new interpreter state object. The global interpreter lock need not be held, but may be held if it is necessary to serialize calls to this function.

void PyInterpreterState_Clear(PyInterpreterState *interp)¶: Reset all information in an interpreter state object. The global interpreter lock must be held.

void PyInterpreterState_Delete(PyInterpreterState *interp)¶: Destroy an interpreter state object. The global interpreter lock need not be held. The interpreter state must have been reset with a previous call to PyInterpreterState_Clear().

PyThreadState* PyThreadState_New(PyInterpreterState *interp)¶: Create a new thread state object belonging to the given interpreter object. The global interpreter lock need not be held, but may be held if it is necessary to serialize calls to this function.

void PyThreadState_Clear(PyThreadState *tstate)¶: Reset all information in a thread state object. The global interpreter lock must be held.

void PyThreadState_Delete(PyThreadState *tstate)¶: Destroy a thread state object. The global interpreter lock need not be held. The thread state must have been reset with a previous call to PyThreadState_Clear().

PyObject* PyThreadState_GetDict()¶

Return value: Borrowed reference.

Return a dictionary in which extensions can store thread-specific state information. Each extension should use a unique key to use to store state in the dictionary. It is okay to call this function when no current thread state is available. If this function returns NULL, no exception has been raised and the caller should assume no current thread state is available.

Changed in version 2.3: Previously this could only be called when a current thread is active, and NULL meant that an exception was raised.

int PyThreadState_SetAsyncExc(long id, PyObject *exc)¶

Asynchronously raise an exception in a thread. The id argument is the thread id of the target thread; exc is the exception object to be raised. This function does not steal any references to exc. To prevent naive misuse, you must write your own C extension to call this. Must be called with the GIL held. Returns the number of thread states modified; this is normally one, but will be zero if the thread id isn’t found. If exc is NULL, the pending exception (if any) for the thread is cleared. This raises no exceptions.

New in version 2.3.

void PyEval_AcquireThread(PyThreadState *tstate)¶

Acquire the global interpreter lock and set the current thread state to tstate, which should not be NULL. The lock must have been created earlier. If this thread already has the lock, deadlock ensues.

PyEval_RestoreThread() is a higher-level function which is always available (even when thread support isn’t enabled or when threads have not been initialized).

void PyEval_ReleaseThread(PyThreadState *tstate)¶

Reset the current thread state to NULL and release the global interpreter lock. The lock must have been created earlier and must be held by the current thread. The tstate argument, which must not be NULL, is only used to check that it represents the current thread state — if it isn’t, a fatal error is reported.

PyEval_SaveThread() is a higher-level function which is always available (even when thread support isn’t enabled or when threads have not been initialized).

void PyEval_AcquireLock()¶: Acquire the global interpreter lock. The lock must have been created earlier. If this thread already has the lock, a deadlock ensues.

Warning

This function does not change the current thread state. Please use PyEval_RestoreThread() or PyEval_AcquireThread() instead.

void PyEval_ReleaseLock()¶: Release the global interpreter lock. The lock must have been created earlier.

Warning

This function does not change the current thread state. Please use PyEval_SaveThread() or PyEval_ReleaseThread() instead.

Sub-interpreter support¶

While in most uses, you will only embed a single Python interpreter, there are cases where you need to create several independent interpreters in the same process and perhaps even in the same thread. Sub-interpreters allow you to do that. You can switch between sub-interpreters using the PyThreadState_Swap() function. You can create and destroy them using the following functions:

PyThreadState* Py_NewInterpreter()¶

Create a new sub-interpreter. This is an (almost) totally separate environment for the execution of Python code. In particular, the new interpreter has separate, independent versions of all imported modules, including the fundamental modules builtins, __main__ and sys. The table of loaded modules (sys.modules) and the module search path (sys.path) are also separate. The new environment has no sys.argv variable. It has new standard I/O stream file objects sys.stdin, sys.stdout and sys.stderr (however these refer to the same underlying file descriptors).

The return value points to the first thread state created in the new sub-interpreter. This thread state is made in the current thread state. Note that no actual thread is created; see the discussion of thread states below. If creation of the new interpreter is unsuccessful, NULL is returned; no exception is set since the exception state is stored in the current thread state and there may not be a current thread state. (Like all other Python/C API functions, the global interpreter lock must be held before calling this function and is still held when it returns; however, unlike most other Python/C API functions, there needn’t be a current thread state on entry.)

Extension modules are shared between (sub-)interpreters as follows: the first time a particular extension is imported, it is initialized normally, and a (shallow) copy of its module’s dictionary is squirreled away. When the same extension is imported by another (sub-)interpreter, a new module is initialized and filled with the contents of this copy; the extension’s init function is not called. Note that this is different from what happens when an extension is imported after the interpreter has been completely re-initialized by calling Py_Finalize() and Py_Initialize(); in that case, the extension’s initmodule function is called again.

void Py_EndInterpreter(PyThreadState *tstate)¶: Destroy the (sub-)interpreter represented by the given thread state. The given thread state must be the current thread state. See the discussion of thread states below. When the call returns, the current thread state is NULL. All thread states associated with this interpreter are destroyed. (The global interpreter lock must be held before calling this function and is still held when it returns.) Py_Finalize() will destroy all sub-interpreters that haven’t been explicitly destroyed at that point.

Bugs and caveats¶

Because sub-interpreters (and the main interpreter) are part of the same process, the insulation between them isn’t perfect — for example, using low-level file operations like os.close() they can (accidentally or maliciously) affect each other’s open files. Because of the way extensions are shared between (sub-)interpreters, some extensions may not work properly; this is especially likely when the extension makes use of (static) global variables, or when the extension manipulates its module’s dictionary after its initialization. It is possible to insert objects created in one sub-interpreter into a namespace of another sub-interpreter; this should be done with great care to avoid sharing user-defined functions, methods, instances or classes between sub-interpreters, since import operations executed by such objects may affect the wrong (sub-)interpreter’s dictionary of loaded modules.

Also note that combining this functionality with PyGILState_*() APIs is delicate, because these APIs assume a bijection between Python thread states and OS-level threads, an assumption broken by the presence of sub-interpreters. It is highly recommended that you don’t switch sub-interpreters between a pair of matching PyGILState_Ensure() and PyGILState_Release() calls. Furthermore, extensions (such as ctypes) using these APIs to allow calling of Python code from non-Python created threads will probably be broken when using sub-interpreters.

Asynchronous Notifications¶

A mechanism is provided to make asynchronous notifications to the main interpreter thread. These notifications take the form of a function pointer and a void argument.

Every check interval, when the global interpreter lock is released and reacquired, Python will also call any such provided functions. This can be used for example by asynchronous IO handlers. The notification can be scheduled from a worker thread and the actual call than made at the earliest convenience by the main thread where it has possession of the global interpreter lock and can perform any Python API calls.

int Py_AddPendingCall(int (*func)(void *), void *arg)¶

Post a notification to the Python main thread. If successful, func will be called with the argument arg at the earliest convenience. func will be called having the global interpreter lock held and can thus use the full Python API and can take any action such as setting object attributes to signal IO completion. It must return 0 on success, or -1 signalling an exception. The notification function won’t be interrupted to perform another asynchronous notification recursively, but it can still be interrupted to switch threads if the global interpreter lock is released, for example, if it calls back into Python code.

This function returns 0 on success in which case the notification has been scheduled. Otherwise, for example if the notification buffer is full, it returns -1 without setting any exception.

This function can be called on any thread, be it a Python thread or some other system thread. If it is a Python thread, it doesn’t matter if it holds the global interpreter lock or not.

New in version 2.7.

Profiling and Tracing¶

The Python interpreter provides some low-level support for attaching profiling and execution tracing facilities. These are used for profiling, debugging, and coverage analysis tools.

Starting with Python 2.2, the implementation of this facility was substantially revised, and an interface from C was added. This C interface allows the profiling or tracing code to avoid the overhead of calling through Python-level callable objects, making a direct C function call instead. The essential attributes of the facility have not changed; the interface allows trace functions to be installed per-thread, and the basic events reported to the trace function are the same as had been reported to the Python-level trace functions in previous versions.

int (*Py_tracefunc)(PyObject *obj, PyFrameObject *frame, int what, PyObject *arg)¶

The type of the trace function registered using PyEval_SetProfile() and PyEval_SetTrace(). The first parameter is the object passed to the registration function as obj, frame is the frame object to which the event pertains, what is one of the constants PyTrace_CALL, PyTrace_EXCEPTION, PyTrace_LINE, PyTrace_RETURN, PyTrace_C_CALL, PyTrace_C_EXCEPTION, or PyTrace_C_RETURN, and arg depends on the value of what:

Value of what	Meaning of arg
`PyTrace_CALL`	Always NULL.
`PyTrace_EXCEPTION`	Exception information as returned by `sys.exc_info()`.
`PyTrace_LINE`	Always NULL.
`PyTrace_RETURN`	Value being returned to the caller, or NULL if caused by an exception.
`PyTrace_C_CALL`	Function object being called.
`PyTrace_C_EXCEPTION`	Function object being called.
`PyTrace_C_RETURN`	Function object being called.

int PyTrace_CALL¶: The value of the what parameter to a Py_tracefunc function when a new call to a function or method is being reported, or a new entry into a generator. Note that the creation of the iterator for a generator function is not reported as there is no control transfer to the Python bytecode in the corresponding frame.

int PyTrace_EXCEPTION¶: The value of the what parameter to a Py_tracefunc function when an exception has been raised. The callback function is called with this value for what when after any bytecode is processed after which the exception becomes set within the frame being executed. The effect of this is that as exception propagation causes the Python stack to unwind, the callback is called upon return to each frame as the exception propagates. Only trace functions receives these events; they are not needed by the profiler.

int PyTrace_LINE¶: The value passed as the what parameter to a trace function (but not a profiling function) when a line-number event is being reported.

int PyTrace_RETURN¶: The value for the what parameter to Py_tracefunc functions when a call is returning without propagating an exception.

int PyTrace_C_CALL¶: The value for the what parameter to Py_tracefunc functions when a C function is about to be called.

int PyTrace_C_EXCEPTION¶: The value for the what parameter to Py_tracefunc functions when a C function has raised an exception.

int PyTrace_C_RETURN¶: The value for the what parameter to Py_tracefunc functions when a C function has returned.

void PyEval_SetProfile(Py_tracefunc func, PyObject *obj)¶: Set the profiler function to func. The obj parameter is passed to the function as its first parameter, and may be any Python object, or NULL. If the profile function needs to maintain state, using a different value for obj for each thread provides a convenient and thread-safe place to store it. The profile function is called for all monitored events except the line-number events.

void PyEval_SetTrace(Py_tracefunc func, PyObject *obj)¶: Set the tracing function to func. This is similar to PyEval_SetProfile(), except the tracing function does receive line-number events.

PyObject* PyEval_GetCallStats(PyObject *self)¶

Return a tuple of function call counts. There are constants defined for the positions within the tuple:

Name	Value
`PCALL_ALL`	0
`PCALL_FUNCTION`	1
`PCALL_FAST_FUNCTION`	2
`PCALL_FASTER_FUNCTION`	3
`PCALL_METHOD`	4
`PCALL_BOUND_METHOD`	5
`PCALL_CFUNCTION`	6
`PCALL_TYPE`	7
`PCALL_GENERATOR`	8
`PCALL_OTHER`	9
`PCALL_POP`	10

PCALL_FAST_FUNCTION means no argument tuple needs to be created. PCALL_FASTER_FUNCTION means that the fast-path frame setup code is used.

If there is a method call where the call can be optimized by changing the argument tuple and calling the function directly, it gets recorded twice.

This function is only present if Python is compiled with CALL_PROFILE defined.

Advanced Debugger Support¶

These functions are only intended to be used by advanced debugging tools.

PyInterpreterState* PyInterpreterState_Head()¶

Return the interpreter state object at the head of the list of all such objects.

New in version 2.2.

PyInterpreterState* PyInterpreterState_Next(PyInterpreterState *interp)¶

Return the next interpreter state object after interp from the list of all such objects.

New in version 2.2.

PyThreadState * PyInterpreterState_ThreadHead(PyInterpreterState *interp)¶

Return the a pointer to the first PyThreadState object in the list of threads associated with the interpreter interp.

New in version 2.2.

PyThreadState* PyThreadState_Next(PyThreadState *tstate)¶

Return the next thread state object after tstate from the list of all such objects belonging to the same PyInterpreterState object.

New in version 2.2.

[ NAME ]	[ SIZE ]	[ PERM ]	[ DATE ]	[ ACT ]
+FILE +DIR
abstract.html	7.088 KB	-rw-r--r--	2019-07-03 16:47	R E G D
allocation.html	16.938 KB	-rw-r--r--	2019-07-03 16:47	R E G D
arg.html	55.631 KB	-rw-r--r--	2019-07-03 16:47	R E G D
bool.html	9.242 KB	-rw-r--r--	2019-07-03 16:47	R E G D
buffer.html	43.941 KB	-rw-r--r--	2019-07-03 16:47	R E G D
bytearray.html	13.03 KB	-rw-r--r--	2019-07-03 16:47	R E G D
capsule.html	19.039 KB	-rw-r--r--	2019-07-03 16:47	R E G D
cell.html	10.358 KB	-rw-r--r--	2019-07-03 16:47	R E G D
class.html	10.483 KB	-rw-r--r--	2019-07-03 16:47	R E G D
cobject.html	11.063 KB	-rw-r--r--	2019-07-03 16:47	R E G D
code.html	10.791 KB	-rw-r--r--	2019-07-03 16:47	R E G D
codec.html	18.942 KB	-rw-r--r--	2019-07-03 16:47	R E G D
complex.html	19.012 KB	-rw-r--r--	2019-07-03 16:47	R E G D
concrete.html	15.163 KB	-rw-r--r--	2019-07-03 16:47	R E G D
conversion.html	20.981 KB	-rw-r--r--	2019-07-03 16:47	R E G D
datetime.html	23.48 KB	-rw-r--r--	2019-07-03 16:47	R E G D
descriptor.html	10.97 KB	-rw-r--r--	2019-07-03 16:47	R E G D
dict.html	29.896 KB	-rw-r--r--	2019-07-03 16:47	R E G D
exceptions.html	75.95 KB	-rw-r--r--	2019-07-03 16:47	R E G D
file.html	21.848 KB	-rw-r--r--	2019-07-03 16:47	R E G D
float.html	15.853 KB	-rw-r--r--	2019-07-03 16:47	R E G D
function.html	13.157 KB	-rw-r--r--	2019-07-03 16:47	R E G D
gcsupport.html	20.246 KB	-rw-r--r--	2019-07-03 16:47	R E G D
gen.html	7.919 KB	-rw-r--r--	2019-07-03 16:47	R E G D
import.html	32.448 KB	-rw-r--r--	2019-07-03 16:47	R E G D
index.html	12.549 KB	-rw-r--r--	2019-07-03 16:47	R E G D
init.html	96.339 KB	-rw-r--r--	2019-07-03 16:47	R E G D
int.html	18.311 KB	-rw-r--r--	2019-07-03 16:47	R E G D
intro.html	62.213 KB	-rw-r--r--	2019-07-03 16:47	R E G D
iter.html	9.156 KB	-rw-r--r--	2019-07-03 16:47	R E G D
iterator.html	10.897 KB	-rw-r--r--	2019-07-03 16:47	R E G D
list.html	22.267 KB	-rw-r--r--	2019-07-03 16:47	R E G D
long.html	31.926 KB	-rw-r--r--	2019-07-03 16:47	R E G D
mapping.html	14.414 KB	-rw-r--r--	2019-07-03 16:47	R E G D
marshal.html	14.774 KB	-rw-r--r--	2019-07-03 16:47	R E G D
memory.html	23.165 KB	-rw-r--r--	2019-07-03 16:47	R E G D
method.html	12.474 KB	-rw-r--r--	2019-07-03 16:47	R E G D
module.html	15.327 KB	-rw-r--r--	2019-07-03 16:47	R E G D
none.html	7.392 KB	-rw-r--r--	2019-07-03 16:47	R E G D
number.html	43.95 KB	-rw-r--r--	2019-07-03 16:47	R E G D
objbuffer.html	11.263 KB	-rw-r--r--	2019-07-03 16:47	R E G D
object.html	51.968 KB	-rw-r--r--	2019-07-03 16:47	R E G D
objimpl.html	6.901 KB	-rw-r--r--	2019-07-03 16:47	R E G D
refcounting.html	11.861 KB	-rw-r--r--	2019-07-03 16:47	R E G D
reflection.html	9.824 KB	-rw-r--r--	2019-07-03 16:47	R E G D
sequence.html	28.301 KB	-rw-r--r--	2019-07-03 16:47	R E G D
set.html	28.225 KB	-rw-r--r--	2019-07-03 16:47	R E G D
slice.html	11.192 KB	-rw-r--r--	2019-07-03 16:47	R E G D
string.html	33.52 KB	-rw-r--r--	2019-07-03 16:47	R E G D
structures.html	30.789 KB	-rw-r--r--	2019-07-03 16:47	R E G D
sys.html	19.179 KB	-rw-r--r--	2019-07-03 16:47	R E G D
tuple.html	19.487 KB	-rw-r--r--	2019-07-03 16:47	R E G D
type.html	12.856 KB	-rw-r--r--	2019-07-03 16:47	R E G D
typeobj.html	150.057 KB	-rw-r--r--	2019-07-03 16:47	R E G D
unicode.html	105.593 KB	-rw-r--r--	2019-07-03 16:47	R E G D
utilities.html	7.23 KB	-rw-r--r--	2019-07-03 16:47	R E G D
veryhigh.html	40.202 KB	-rw-r--r--	2019-07-03 16:47	R E G D
weakref.html	12.476 KB	-rw-r--r--	2019-07-03 16:47	R E G D
REQUEST EXIT

Initialization, Finalization, and Threads¶

Initializing and finalizing the interpreter¶

Process-wide parameters¶

Thread State and the Global Interpreter Lock¶

Releasing the GIL from extension code¶

Non-Python created threads¶

High-level API¶

Low-level API¶

Sub-interpreter support¶

Bugs and caveats¶

Asynchronous Notifications¶

Profiling and Tracing¶

Advanced Debugger Support¶

Table Of Contents

Previous topic

Next topic

This Page

Navigation

Initialization, Finalization, and Threads¶

Initializing and finalizing the interpreter¶

Process-wide parameters¶

Thread State and the Global Interpreter Lock¶

Releasing the GIL from extension code¶

Non-Python created threads¶

High-level API¶

Low-level API¶

Sub-interpreter support¶

Bugs and caveats¶

Asynchronous Notifications¶

Profiling and Tracing¶

Advanced Debugger Support¶

Table Of Contents

Previous topic

Next topic

This Page

Quick search

Navigation